1 / 4

Base Waste Paper Basket Adjustment:

Base Waste Paper Basket Adjustment:. Open BWB until both Philip Screw are visible Loose Screw on each full extension glide Should Be (4) four in total (two per Slide). The front can be tilted as seen in the picture Hold in position Re tighten the four screws. Adjusting the BWB Door

violet-pope
Download Presentation

Base Waste Paper Basket Adjustment:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Base Waste Paper Basket Adjustment: • Open BWB until both Philip Screw are visible • Loose Screw on each full extension glide • Should Be (4) four in total (two per Slide) • The front can be tilted as seen in the picture • Hold in position • Re tighten the four screws

  2. Adjusting the BWB Door from Left to Right Open BWB Door Loose the four screws that attach the metal glide to the door. • Tighten the four screws • Close door to look at position of door.

  3. Adjusting the BWB Door Up and Down • Open BWB Door • Loose the four screws that attach the metal glide to the metal support. • Be careful, the door can easily fall off the track. • Tighten the four screws • Close door to look at position of door.

  4. Adjusting for a BWB Door that opens automatically Push the black clip in on the full Extension Glide. (It will be where the two halves meet. • Open the door to the full extension point • The Clip on the left is the one that needs adjusted. • Note the Location of the Clip in the back of the cabinet • Move the Clip 1/8” to the Right • Tight Clip in Place • Re-assemble the Waste • Paper Basket Assembly in the Glide

More Related