1 / 10

Rubber Gloves

Rubber Gloves. Rubber gloves and sleeves are a lineman’s first and foremost defense against electrocution For this reason rubber gloves and sleeves must be physically and visibly inspected before use!. Insulating Equipment. Secure the work area Remove all hazards

violets
Download Presentation

Rubber Gloves

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Rubber Gloves • Rubber gloves and sleeves are a lineman’s first and foremost defense against electrocution • For this reason rubber gloves and sleeves must be physically and visibly inspected before use!

  2. Insulating Equipment Secure the work area Remove all hazards Protect workers from those that cannot be removed

  3. Dielectric Test These are the minimum requirements required by OSHA. Company policy, client and/or contract requirements may mandate shorter inspection cycles

  4. Live Line Tools Minimum approach distance must be maintained • The worker’s hand • The hot end of the stick

  5. Live Line Tools Live-line tools shall be removed from service every 2 years for examination, cleaning, repair, and testing as needed

  6. Live Line Tools Each live-line tool shall be wiped clean and visually inspected for defects before use each day Would you do hot work with dirty sticks? Is an insulated boom any different?

  7. Live Line Tools Test the tool's integrity along its entire working length If the tool is made of fiberglass-reinforced plastic, test its integrity under wet conditions

  8. Second Point of Contact If any part of a boom can contact an energized phase, cover the phase

  9. Second Point of Contact Eliminate second point of contact hazards Cross arm not covered Workers not wearing sleeves Minimum approach distance violation on tie wire

  10. Second Point of Contact Secure work area both above and BELOW the work area

More Related