1 / 7

PDMLink Design Object Numbering

PDMLink Design Object Numbering. Configuring Numbering of WT Parts created via Pro/Engineer interface Terminology Used by PTC: Name, Common Name (in Pro/E) Name, Number (in PDMLink) Filename (various) Also used: CAD Name, PTC_Common_Name???.

virginiah
Download Presentation

PDMLink Design Object Numbering

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PDMLink Design Object Numbering Configuring Numbering of WT Parts created via Pro/Engineer interface Terminology Used by PTC: Name, Common Name (in Pro/E) Name, Number (in PDMLink) Filename (various) Also used: CAD Name, PTC_Common_Name???

  2. OOTB BehaviorName in Pro to Number of CAD Doc (ok)Common Name in Pro to Name of CAD Doc (ok)Number of Model CAD Doc to Number of Part (with extension) NOT OKName of Model CAD Doc to Name of Part (ok) (Filename: 210-2345-001.prt) (Filename: 210-2345-501.drw)

  3. Relevant Config FileAdd True to indicated setting AutoAssociateDropNumberFileExtension = True

  4. Desired Behavior (With use of manual numbering): • Pro/E Name maps to CAD Doc Number, no change • Pro/E Common Name maps to CAD Doc Name, no change • CAD Doc Number of model maps to WTPart Number, no extension • CAD Doc Name of model maps to WTPart Name, no change

  5. Configuration for WTPart Numbering from Pro/E Numbering (WTParts created and associated using Pro/E Option)File: cadxhtmlui.iniKey: AutoAssociateDropNumberExtension=true WTPart Number is same as Number of Model CAD Doc except for .prt (or .asm) extension

  6. Rreference: For .prt and .asm having same Number:WTPart created only for .asm. requires individual checkin of .prt prior to .asm WTPart is created for this .asm No WTPart created for this .prt

More Related