1 / 18

EE 136 Final Presentation

EE 136 Final Presentation. Professor Dr. Zhou Presented by: Cynthia David. Agenda. Part 1, Chapter 22 Centering of Auxiliary Output Voltages on Multiple-Output Converters. Part 1, Chapter 23 Auxiliary Supply Systems Part 1, Chapter 24 Operation of Voltage-Stabilized Power Supplies.

viviana-hurley
Download Presentation

EE 136 Final Presentation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. EE 136 Final Presentation Professor Dr. Zhou Presented by: Cynthia David

  2. Agenda • Part 1, Chapter 22 • Centering of Auxiliary Output Voltages on Multiple-Output Converters. • Part 1, Chapter 23 • Auxiliary Supply Systems • Part 1, Chapter 24 • Operation of Voltage-Stabilized Power Supplies

  3. Centering Auxiliary Output Voltages on Multiple-Output Converters • Problem • Obtaining an absolute output voltage value. • Solution • Saturable reactors – small toroids • Used to control voltage and current control. • Provides pulse width / timing techniques

  4. Centering Auxiliary Output Voltages on Multiple-Output Converters • Saturable Reactors • with a forward converter . Vout = Vs × ton / ( ton + toff ) from Chapter 21 Part 1 • Example Given Vout = +12, -12, +5 Desire: 11.5 turns use 12 Higher Output Voltage is given ie. 12.7 ton = 15 µs toff = 18 µs

  5. Centering Auxiliary Output Voltages on Multiple-Output Converters • Saturable Reactors • td = ton – required V × ton / (actual Vout ) = 15 - (12*15) / (12.7) = .827 µs td is delay time, ton is on cycle, • Vs = Vout ( ton + toff) / ton = 27.9 V . • td = Np × ∆B × Ae / (Vs) Np is the primary turns, ∆B difference in remanance flux from flux density saturation. Ae is the effective area of the core. Given ∆B = .4 • Ae = Vs × td / ( Np × ∆B ) assume Np = 1.

  6. Centering Auxiliary Output Voltages on Multiple-Output Converters • Saturable Reactors • Ae = Vs × td / ( Np × ∆B ) assume Np = 1. = 27.9*.827 µs / (1 * .4) = 57.7 mm^2

  7. Centering Auxiliary Output Voltages on Multiple-Output Converters • Applications • large industrial furnaces, welders and high-power voltage regulators. • Important Concept • Depending on application, with saturable reactors, decide to alter the area or number of turn ratios to produce Vout.

  8. Auxiliary Supply Systems • Auxiliary Supply Systems • Provide power for control • Drive circuits within the main switch-mode unit. • Need to be common to input and output lines. • Safety factors must be given • Creepage distance, isolation requirements • Auxiliary supply methods must be considered

  9. Auxiliary Supply Systems • Various auxiliary supply units • 60 Hz Line Transformers • Energized before the main converter, allows power available to the main switching mode. • Meets insulation and creepage requirements. • Disadvantage: size & cost

  10. Auxiliary Supply Systems • Auxiliary Converters • Two auxiliary power supplies from high frequency flyback converters. + More efficient because energy Is returnted to the supply during Flyback period.

  11. Auxiliary Supply Systems • Stabilized Auxiliary Converters • Modifications Zener Diode,Q2, winding P3 • Maintains constant frequency + Maintains constant frequency. Can Be used as a clock.

  12. Auxiliary Supply Systems • High-efficiency auxiliary supply. • Includes a bridge rectifier supply the converter & fan application + Most efficient supply system + Useful in 110-220V applications

  13. Parallel Operation of Voltage-Stabilized Power Supplies • Voltage Stabilized Power Supplies • connected in parallel with high voltages • usually have small output resistances • big difference in current load! • desire equal distribution in current • may cause output power supply to be overloaded! Domino Effect!

  14. Parallel Operation of Voltage-Stabilized Power Supplies • Configurations of Power Supplies • Master Slave Operation • Master controls the parallel supplies. P-terminal and Transistor 3 control current KEY POINTS + Similar output current - 20% Accurate - Limited to the number of supplies - If Master Fails, other units follow

  15. Parallel Operation of Voltage-Stabilized Power Supplies • Configurations of Power Supplies • Voltage – Controlled Current Source • P terminal link adjust for output voltage, R1 and R2 sense output current. KEY POINTS + More accurate output current - Less percent of failure

  16. Parallel Operation of Voltage-Stabilized Power Supplies • Configurations of Power Supplies • Force Current Sharing • Compares Vref and V from R3 and R4 to maintain constant Voutput. • A2 compares the currents and Rx alternates alters V2 and Vout. KEY POINTS + More accurate output current + Failure to one does not affect others. + Redistribute load if others fail. + Output voltage adjust itself to the average value of the independent units.

  17. Parallel Operation of Voltage-Stabilized Power Supplies • Configurations of Power Supplies • Parallel Redundant Operation • Ensures maintenance of power in case supply fails. • Diodes senses differences in Voutput. KEY POINTS + Failure to one does not affect others. + Redistribute load if others fail

  18. Conclusion • Review • Centering of Auxiliary Output Voltages on Multiple-Output Converters • Auxiliary Supply Systems • Parallel Operation of Voltage Stabilized Power Supplies.

More Related