570 likes | 789 Views
动态测试技术. 余征跃 上海交通大学 工程力学实验中心 yuzy@sjtu.edu.cn 54743053 13341763417 闵行校区电工力学楼 103 室. 6.Experimental Modal Analysis. 2 – LASER DOPPLER VIBROMETER. Outline. Basics of LDV Measurement & Analysis Applications. Contactless vibration measurements High spatial resolution High frequency range.
E N D
动态测试技术 余征跃 上海交通大学 工程力学实验中心 yuzy@sjtu.edu.cn 54743053 13341763417 闵行校区电工力学楼103室
6.Experimental Modal Analysis 2 – LASER DOPPLER VIBROMETER
Outline Basics of LDV Measurement & Analysis Applications 3
Contactless vibration measurements High spatial resolution High frequency range Laser Doppler Vibrometry 4
Basics of LDV • The fundamental basics of LDV can be deduced from its name • LASER • An LVD consists of a “LASER” source • DOPPLER • An LDV uses the “Doppler Effect” • VIBROMETER • An LDV measures “Vibrations” 6
Laser Basics • LASER = Light Amplification by Stimulated Emission of Radiation 7
Laser Basics • Optical cavity 8
Laser Basics • Properties of laser light • Nearly monochromatic (very sharp defined wavelength) • Low divergence (the complete energy of the laser beam can be directed and focused) • High coherence (prerequisite for interference) • Typical coherence lengths • Light bulb: some μm • Normal HeNe lasers: 0.3 m • Frequency stabilized mono mode HeNe lasers: several km 9
The Doppler Effect • Doppler’s experiment • Doppler used two sets of trumpeters: one set stationary at a train station and one set on a train 10
The Doppler Effect • Beat frequency 11
Doppler Effect in Optics • Frequency shift (Doppler frequency) is of the order of 1 to 100 MHz • Frequency of laser light is 4.7E+14 Hz • Direct detection of the frequency shift is not possible • To detect the Doppler frequency shift an interferometer is used 13
Interferometer • M = Measured (moving) object • R = Reference 15
Bragg Cell 17
Bragg Cell 18
Surface Effects • Highly reflecting surfaces 19
Surface Effects • Diffuse surfaces scatter the incident light over a large angular area 20
Vibrometers • “Out-of-Plane” Single-Point Vibration • “Out-of-Plane” Differential Vibration 21
Vibrometers • “In-Plane” Vibration • “Rotational” Vibration • “3D” Vibration 22
Vibrometers • “Out-of-Plane Scanning” LDV • “3D Scanning” LDV 23
Measurement and Analysis • Scanning LDV • Measurement Mode • Referenced measurements • FRF, coherence, … • Non-referenced measurements • Auto power spectrum, … • Presentation Mode • Analysis of the measurements • resonant frequencies • mode shapes (ODS) 28
Setting up the Scanning Head • Focussing the Laser Beam • Positioning the Laser Beam • Zooming and Focussing the Video Camera 30
General Channels Frequency Window SE Vibrometer Generator Measurement mode FFT Fast Scan Averaging Acquisition Settings 33
Averaging • None • Magnitude • No reference signal and no trigger • Complex • Reference signal or trigger 34
Averaging • No reference signal and no trigger • Trigger • Reference signal 35
Acquisition Settings • Channels • Reference • Range • Coupling • Quantity • Sensitivity • Frequency • Bandwidth • FFT lines • Overlap 36
Acquisition Settings • Window • Rectangular • Hanning • … • Trigger • External (TTL) • Analog • Pre-trigger 37
Acquisition Settings • Signal Enhancement • Speckle tracking • Vibrometer • Sensitivity • Tracking filter • Low-pass filter 38
Acquisition Settings • Waveform • Sine • Periodic Chirp • Pseudo Random • Random • Sweep • User Defined • … 39
Zero phase CF = 16 Schroeder phase CF = 1.70 Multisines • L-infinity algorithm • CF = 1.40 40
Nonlinearities • Excitation level 1 • Amplitude (dB) • Coherence • Excitation level 2 • Amplitude (dB) • Coherence 41
X Frequency Xodd Xeven Nx (Odd-odd) Multisines 42
Choice of Excitation Signal • Periodic chirp • Avrg. = 5 • Uniform window • Random noise • Avrg. = 20 • Hanning window 43
Metal Plate 45
Metal Plate • Resonant frequencies 46
Metal Plate • Mode shape @ 314 Hz 47
Metal Plate with CLD • Resonant frequencies 49
Metal Plate with CLD • Mode shape @ 314 Hz 50