Seamless Steel Pipe

1. WANSTEEL GROUP https://sdwansteelpipe.com/products/seamless-steel-pipe/ Seamless steel pipe (SMLS) is formed by drawing a solid billet over a piercing rod to create the hollow shell, without welding or seam. It is suitable for bending and flanging. The most advantage is increasing the ability of withstanding higher pressure. So it is widely used for boiler and pressure vessel, automotive area, oil well, and equipment components. Seamless steel pipe can be cut, threaded or grooved. And the coating method includes black / red lacquer, varnish painting, hot dip galvanization, etc. Seamless Steel Pipe Chemical Composition: Grade Ni Cr Mo Fe Cu Mn C Si Al S P Others UNS 2.0 0.024 63 min. 2.5 max. 28.0-34.0 0.3 max. 0.5 max. N04400 max. max. UNS 1.0 0.15 0.015 72.0 min. 14.0-17.0 6.0-10.0 0.5 max. 0.5 max. N06600 max. max. max. UNS 0.5 0.05 0.015 58.0 min. 27.0-31.0 7.0-11.0 0.5 max. 0.5 max. N06690 max. max. max. UNS 1.0 0.15 remainder 27.0-31.0 2.5-6.0 0.5 max. 0.5 max. 2.5-4.0 0.01 max. Ti: 1.0 max. N06693 max. max. UNS 0.5 0.4 0.015 Nb+Ta: 3.15-4.15Co: 1.0 58.0 min. 20.0-23.0 8.0-10.0 5.0 max. 0.1 max. 0.5 max. 0.01max. N06625 max. max. max. max.Ti: 0.40 max. UNS 0.75 1.5 30.0-35.0 19.0-23.0 39.5 min. 0.1 max. 1.0 max. 0.15-0.6 0.015ma. N08800 max. max. UNS 1.0 0.05 0.2 38.0-46.0 19.5-23.5 2.5-3.5 22.0 min. 1.5-3.0 0.5 max. 0.03 max. N08825 max. max. max. UNS 2.5 0.03 30.0-34.0 26.0-28.0 3.0-4.0 remainder 0.6-1.4 1.0 max. 0.03 max. 0.03 max. N08028 max. max. UNS 2.0 24.0-26.0 19.0-21.0 6.0-7.0 remainder 0.5-1.5 0.02max. 0.5 max. 0.01 max. 0.03 max. N2: 0.15-0.25 N08926 max. UNS 2.0 0.02 0.045 23.0-28.0 19.0-23.0 4.0-5.0 remainder 1.0-2.0 1.0 max. 0.035ma. N08904 max. max. max. UNS 1.0 0.01 0.015 Co: 2.5 max.W: 3.0-4.0V: remainder 15.0-16.5 15.0-17.0 4.0-7.0 0.08max. 0.01 max. N10276 max. max. max 0.1-0.3 https://sdwansteelpipe.com/products/seamless-steel-pipe/ WANSTEEL GROUP