1 / 7

Determination of Pavement Thickness with HMA Surface and Emulsified Asphalt Base

This example illustrates the calculation of minimum HMA thickness and thickness of emulsified asphalt base for a pavement design.

wdelmonte
Download Presentation

Determination of Pavement Thickness with HMA Surface and Emulsified Asphalt Base

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Example 3: Determination of Mr = 3/8

  2. Example 4: Pavement Thickness Given Mr = 10,000 psi (69 MPa) and ESAL = 106, design the thickness of a pavement with a HMA surface over a type-II emulsifies asphalt base Combined thickness = 10.5 inch (267 mm)

  3. Calculate the minimum HMA thickness = 3 inch Calculate the thickness of emulsified asphalt base = 10.5 -3 = 7.5 inch Cont. Example 4: Pavement Thickness 3 in Surface base 7.5 in Subgrade Minimum Thickness of Asphalt Concrete Over Emulsified Asphalt Bases

  4. Considered as a cold mix asphalt = Fine aggregate + Emulsion

  5. Marshall Method- Numerical Example

More Related