1 / 43

SolidWorks

SolidWorks. Week 2-3. เนื้อหา. คำสั่ง shell/fillet คำสั่ง Revolved Boss/Base, Revolved Cut คำสั่ง Swept Boss/Base, Swept Cut คำสั่ง Lofted Boss/Base, Lofted Cut การสร้าง ระนาบ ( plane). Practice 1: Shell/Fillet. Online Tutorial : Lesson 1 Part. Practice 2: Revolved boss/ swept.

wfrey
Download Presentation

SolidWorks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SolidWorks Week 2-3

  2. เนื้อหา • คำสั่ง shell/fillet • คำสั่ง Revolved Boss/Base, Revolved Cut • คำสั่ง Swept Boss/Base, Swept Cut • คำสั่ง Lofted Boss/Base, Lofted Cut • การสร้าง ระนาบ (plane)

  3. Practice 1: Shell/Fillet • Online Tutorial : Lesson 1 Part

  4. Practice 2: Revolved boss/ swept • Follow steps in online tutorial (revolve & sweep feature)

  5. Make this line equal to the one above

  6. The Handle is a Swept Boss/Base

  7. View Relationships, All in sketch

  8. Add 1 more dimension, height of handle = 10 & exit

  9. Add Horiz Relation

  10. Keep sketch open, conjoin ellipse with start of sweep path (Relation)Keep Sketch open from last step, afterwards, Afterwards, hide temp axis, exit sketch

  11. Click top of object, sketch, Normal to…

  12. Practice 3: Loft • Follow steps in online tutorial (loft)

  13. Practice 4: Rib

  14. Step 1: 2D sketch on front plane

  15. Extrude thin

  16. Step 2 : sketch a line on front plane

  17. Create rib

  18. Finished part

  19. Practice 5: plane (with angle)

  20. Step 1 :sketch 2D on top plane

  21. Extrude base

  22. Step 2: create new planeselect top plane, Ctrl-click hinge edge, Insert>ReferenceGeometry>Plane

  23. Step 3: sketch 2D on new plane

  24. Extrude boss

  25. Finished part

  26. Home works • Unit: Inches

  27. Unit: Inches

  28. Unit: Inches

  29. Unit: mm

  30. Unit: mm

More Related