1 / 19

COMPUTER AIDED ENGINEERING CAPABILITIES

COMPUTER AIDED ENGINEERING CAPABILITIES. Mpa. Mpa. NONLINEAR CONTACT ANALYSIS. Epicyclic Gear. Radial Stress in Planetary gear. Finite Element Model. Circumferential Stress in Sun gear.

wilkinsonl
Download Presentation

COMPUTER AIDED ENGINEERING CAPABILITIES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. COMPUTER AIDED ENGINEERING CAPABILITIES

  2. Mpa Mpa NONLINEAR CONTACT ANALYSIS Epicyclic Gear Radial Stress in Planetary gear Finite Element Model Circumferential Stress in Sun gear For the rated lock torque of 18 Nm the stresses in all components were found to be within limits.

  3. ROLLER CLUTCH CONTACT ANLYSIS Finite Element Model Deformed Mesh Outer Sleeve Roller Journal Equivalent Stress

  4. THERMAL ANALYSIS 1m/sec 2 m/sec ALTERNATOR HEATSINK Temperature variation with respect to Velocity

  5. PERMANENT MAGNET MOTOR DESIGN Solid Model Finite Element Model Software used : MagNet

  6. PERMANENT MAGNET MOTOR DESIGN Current Density Brush Shift Flux Density

  7. PERMANENT MAGNET MOTOR DESIGN

  8. ELECTROMAGNETIC ANALYSIS - CLAW POLE ALTERNATORS SOLID MODEL SHADED PLOT ROTOR ARROW PLOT SHADED PLOT STATOR

  9. MULTIBODY DYNAMIC ANALYSIS KINEMATIC ANALYSIS OF WIPING SYSTEM No.of.JOINTS:12 Pin joints:7 Ball joint:4 Bearing joint:1 Driver Side:Variable radius pattern Passenger Side:Constant radius pattern

  10. DESIGN OPTIMISATION Starter Bracket Original design Stress plot Final optimised design Weight 1310 gms Weight 880 gms

  11. PROCESS SIMULATION To study the stress distribution in driving shaft into claw and core FE model VonMisses stress

  12. FATIGUE ANALYSIS Von mises stress plot Element discretisation Fatigue life prediction of components

  13. FATIGUE ANALYSIS Drive sleeve Journal shaft Fatigue life prediction of components

  14. CFD ANALYSIS OF ALTERNATOR Computational grid of Alternator Velocity vector at midplane Velocity vector at vertical plane

  15. SOLENOID ACTUATORS FLUX CONTOUR PLOT FOR FINAL POSITION 2D AXISYMMETRIC MODEL

  16. USE OF MOULD FLOW SOFTWARE Wiper gear moulding

  17. CREATIVITY AND INNOVATION

  18. ENGINEERING ACTIVITIES – PROJECT MANAGEMENT USING MS PROJECTS

  19. WINDCHILL PLM IN USE

More Related