how to reset hp printer and fix printer offline

1. Table Of Content how to reset hp printer how to turn printer online hp How to reset HP printer Yes, you can reset hp printer. Printer reset is generally done by disconnecting the power cord when the printer is ON. The printer reset can be done in three types, and they are hard reset, cold reset, and soft reset. How to do a Full reset on my HP printer? Turn on the printer and allow it to become idle. Disconnect the power cord from the printer when it is turned ON. Remove the power cord from the wall outlet of the printer. Wait for 60 seconds. Reconnect the power cord to the wall outlet. Insert the power cord into the printer, and it turns on automatically. Turn it on manually if it does not turn on automatically. Enter the initial settings while booting up and the reset is completed. What are the different ways in which I can reset the printer?

2. Printer reset is generally done to resolve any minor issues in it. Many types of printer reset can be done. The type of printer resets upon the intensity of the problem. On the basis of the severity, the printer reset is classified into partial reset, semi-full reset, and full reset. The partial reset just refreshed the printer memory and clears out unneeded information. This reset fixes minor issues like slow printing and cartridge issues. Turn on the printer and remove the power cord from it. Wait for 20- 30 seconds and reconnect the power cord to it. Press and hold the cancel button when the printer boots up to perform a partial reset. Semi-full reset in the printer is done if the printer issue is not fixed by performing a partial reset. Doing a semi-full reset clears out the custom settings and returns to factory default. Turn on the printer and remove the power cord from both the ends of the printer. Reconnect the power cord of the printer and make sure that you connect it back to the wall outlet. Doing the step mentioned above resets the printer to its factory settings and clears out all the custom settings. The full reset is done on the printer if none of those mentioned above steps work. The full reset is the most powerful reset among all the resets.

3. You can perform a hard reset by turning off the printer when the printer is turned on. Wait for 60 seconds and connect back the power cord to it. Following the steps mentioned above correctly helps you to perform all the three reset methods. How to turn printer online HP Yes, you can turn your printer online by checking the network connection of the printer. Sometimes, a weaker network makes the printer to go offline. Make sure that you place the printer nearer to the computer and wireless network. How to use print and scan doctor to bring my printer online? Install the HP Print and Scan doctor tool from the driver package. Open the installed application and click Start. Select your HP printer from the list and click OK. Select Fix Printing option when prompted by the software. After selecting it, the software runs a scan. Select the issue from the list of problems displayed on the software. Follow the instructions provided by the software to solve the issues. Following the above steps resolves the offline error on the printer.

4. What are the troubleshooting methods to bring the printer online? You can reset the print environment of your printer you face the offline error. Turn the printer on and hold on until the noise stops. Remove the power cord of the printer and the wall outlet. Wait for 60 seconds and connect the power cord back to the printer. Make sure that you connect the printer directly to the wall outlet. Do not connect the printer to the UPS or surge protector. Connecting it to them will not allow the printer to draw maximum power out of it. After reconnecting the power cord, the printer turns ON automatically. If it does not turn on, then turn it ON manually by pressing the Power button on the control panel. Enter the details like date, time and select the language when it boots up. After it idles, the printer gets reset successfully. If the problem continues to exist, set the printer as the default one and check for the error message on the printer’s control panel. Test print a document to check the connectivity. If the printer does not print, download the HP Print and Scan doctor tool. Run HPPSdr.exe file on your computer to begin the installation. Open the software and press the Start button to select your printer from the list. Select the Fix Printing option on the software. The software displays the list of issues found on the printer. If the issue is small, the software automatically resolves the issue.

5. If the issue is big, follow the on-screen instructions on the software and proceed with the steps to solve the problem. Test print a page from the computer to ensure the connectivity. To get more information for resetting hp printer and turn on hp printer online from 123.hp.com/setup