HP Envy 4520 Unboxing & First Time Setup Guidelines!

1. Quick HP Envy 4520 Unboxing Setup • For 123.hp.com/setup envy 4520 – Unboxing, Uncrate the Envy 4520 printer and then remove the packing materials in the box. • Raise the scanner lid of the 123.hp.com/envy4520 printer to take out the packing materials from the scanner lid and then seal it. • Lay hold of the sides of the printer, raise the ink cartridge access door, keep away the packing materials once you remove it and then shut the door. • Unlock the paper tray door so that the paper tray gets extended towards you, remove the packing materials and keep it aside. • Pull the paper tray outward till it snap into place. Subsequently, close the access door of your HP Envy 4520 printer. • Keep one end of the power cord to the HP Envy 4520 printer’s rear end, and other end of the power cable to the power supply. • Use the down arrow to choose the language,Country/Region on the printer’s control panel and then click the OK button. • Use the down arrow and choose the Yes option, subsequently, click OK. • Unlatch the paper tray door, tug the paper tray and then raise the paper catch. • Move the paper width guides as much it moves. Locate the paper into the input tray and place in a way that the guides are against the paper’s edge. • To fix the ink cartridges, unlock the ink cartridge access door. Dont proceed until you are instructed to so. • Take a new ink cartridge from its package, raise the lid of the ink cartridge slot, and keep the ink cartridges into its slots. • Close the access door. Use the prompts to align the ink cartridges. Subsequently, shut the scanner lid of your 123.hp.com/envy4520 printer. • After accomplishing the configuration process, install the printing software. • You can get this software in a software installation CD. If you don’t have that, reach our website and download. • You are not supposed to connect the printer to the computer until instructed by the printing software. Click here to Download 123.hp.com/setup4520 Printer PDF.