20 likes | 43 Views
There are times when your commercial garage door won’t just budge, and it will be left ruing by neglect you’ve shown towards it. <br>Garage Door Solutions telling you some possible reasons why your commercial garage door isn’t moving or working. For more information visit website: http://www.garagedoorsolutionstx.com/
E N D
Reasons Why Your Commercial Garage Door Reasons Why Your Commercial Garage Door Isn’t Working Properly Isn’t Working Properly Since it is continuously used in a business environment, a commercial garage door is subjected to a lot of wear and tear on a daily basis. Now, regardless of how sturdy or how good the material for the door is, the routine use of these doors would one day signal the need for a repair or garage door services in Dallas, TX. There are times when your commercial garage door won’t just budge, and it will be left ruing by neglect you’ve shown towards it. However, before the repairmen come to check what the problem is, you can benefit from some background information here. Here are some possible reasons why your commercial garage door isn’t moving or working properly: The Photo The Photo- -Ey One of the most common faults experienced with commercial garage doors in Dallas, TX, is a blocked or dirty photo-eye. For those who are not aware of it, the photo-eye inside the garage door acts as a scanner of sorts that scans the ground beneath when the garage door is being closed. Whenever the photo-eye notices an object or an intrusion below, it stops the door almost 4 feet from the ground to avoid damage of any sorts. If your garage door is stopping 4 feet above the ground, then you to could be suffering from a dirty or blocked photo-eye. Often times, this problem occurs because of the accumulation of dirt over the Eye is Misaligned or Blocked e is Misaligned or Blocked
photo-eye. The scanner interprets this dirt as an intrusion and hinders the gate from closing properly. You will need garage door services in Dallas, TX, to deal with this issue. Broken Extension Springs Broken Extension Springs If your garage door is not responding to your clicks, then the problem might have to do something with the garage-door assembly. You can further get to the cause of the problem by seeing if the motor is running or not. If the motor is running, which is often the case in most problems, then the issue might lie with broken springs. Broken springs are an inevitable problem with commercial garage doors. You will need a garage door spring repair in Dallas, TX, for this case so that the door can return to its optimal condition again. Snapped Cables Snapped Cables Snapped cables can further aggravate the problem of broken springs. Once the springs are not working, the cables are the only support holding the commercial garage door up. So, in the case that these cables also snap under the pressure, your commercial garage door will come falling on to the concrete, and it will cause a huge noise. This will also cause extensive damage to the structure of the gate. Get commercial garage door services in Dallas, TX, from Garage Door Solutions. We have a unique work ethic and some of the best technicians and equipment for the job. Website: http://www.garagedoorsolutionstx.com/