Choosing a Copier for Your Business

1. Maintenance of a Digital Copier A digital copier can break down all of a sudden and you require a servicing company that deals with these situations immediately and also has the facility to change the required parts whenever necessary. Thus, it is important you take care of your printers and copiers well enough, and also employ a copier servicing firm like (Correct-Tek Copier Svc.) that will be able to help you out whenever you need them. Any modern mechanical device needs a well-skilled maintenance and servicing team. It is important you don't end up wasting too much time in repairs and upkeep. A good service system makes sure that precious man hours are not wasted. Though modern copiers are more reliable than analogue or manual copiers, their servicing needs to be done by a skilled maintenance crew and needs special care and attention. A regular diagnostics check up and servicing will ensure that the copier is rid of any small glitches, even before they start to become big problems. This way you ensure that even though there are many people using the copier or it is undergoing heavy usage, it can still run smoothly. Some points to keep in mind about Digital Copiers and their problems 1. One of the most common problems affecting digital copy machines is that the toner in the copier gets fused because of the heat. You can use cold water to remove the toner from its clothing. 2. There are times when the copying needs to be done with the lid open. In such cases it is advisable to do so by using Edge Erase if your copier has the option. In any case it is advisable not to keep the lid open when copying, as then the copier

2. cannot monitor the amount of toner used, which then results in a thick black layer of ink on the paper. 3. When the digital copier is not in use it is advisable to keep all the paper clips, staples and rubber bands away from the machine. If any of these get jammed into the drum housing area, they can cause some serious damage. 4. Very important is that all the personnel who are going to use the copier must be trained in the proper way of using it. Many times the copier gets spoiled, because of misuse or overuse. A major part of the problem will be solved if the copier is used properly. 5. Another problem that occurs is that the paper gets jammed many times and this can be very frustrating and results in a lot of wasted time. A solution to this problem is that you should use good quality paper. This will not only give you great printing, but will also reduce the chances of a paper jam. Whenever there is such an occurrence, it is advisable that the paper jam should be cleaned out completely to avoid a recurrence of the jam. For More Info - http://ctcopier.com/