1 / 5

2019 Latest CWS-100 Questions and Answers

CWS certification CWS-100 questions and answers are shared in this pdf file.

wirygnrhd
Download Presentation

2019 Latest CWS-100 Questions and Answers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Full version: 60 Q&As Full Version of CWS-100 Exam Dumps Share CWS-100 Exam Dumps Below. 1.When planning for a bridge link between locations, in addition to the link distance, what requirement should be known in order to determine the antennas, settings and bridges to use? A. Required color B. Required power sourcing method C. Required throughput D. Required cable length Answer: B 2.What is the maximum latency or delay requirement in milliseconds for many voice over IP (VoIP) devices?

  2. A. 150 ms B. 100 ms C. 50 ms D. 20 ms Answer: A 3.What acronym is used to define the process of allowing users to use their personal devices on the enterprise WLAN? A. SSID B. BYOD C. MDM D. BSSID Answer: B 4.What process is used in 802.11 networks to provide confidentiality? A. Redundancy B. Encryption C. Authentication

  3. D. Accounting Answer: B 5.What is typically used to define coverage requirements that are measurable? A. Maximum data rate required B. Antenna gain C. Signal strength D. Maximum throughput required Answer: C 6.When open public Wi-Fi access is provided, what can be implemented to help prevent attacks between devices connected to the same AP? A. WPA2 B. WPA C. Device-to-device communication blocking D. WEP Answer: C

  4. 7.What may occur when an RF wave encounters an object large in relation to the wavelength during propagation? A. Reflection B. Lowering of frequency C. Increase in amplitude D. Raising of frequency Answer: A 8.What network service is used to provide automatic Internet Protocol configuration for network client devices? A. DNS B. DHCP C. ARP D. NTP Answer: B 9.What is defined as the strength of an RF wave? A. Phase

  5. B. Wavelength C. Amplitude D. Frequency Answer: C 10.Why is it considered a mistake to use 160 MHz channels in most 5 GHz frequency band enterprise deployments? A. The available frequency space is insufficient for such an implementation B. The data rates will be too high C. The communication retry rates will decrease D. The throughput will be too high Answer: A

More Related