1 / 6

2019 New NACE-CIP1-001 Exam Dumps Questions

Share latest NACE-CIP1-001 exam dumps questions with you.

wirygnrhd
Download Presentation

2019 New NACE-CIP1-001 Exam Dumps Questions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Full version: 100 Q&As Full Version of NACE-CIP1-001 Exam Dumps Share NACE NACE-CIP1-001 Exam Dumps Below. 1.To be of value the Inspector's documentation must be: A. Always handwritten B. Always typewritten C. Timely, accurate and concise D. Submitted before the end of the job Answer: C 2.A NACE Coating Inspector is permitted to transport coating material when: A. Asked to do so by the Coating Application team B. Asked to do so by the Owner's Representative

  2. C. The Inspector should never transport coating material D. If the Inspector meets all the necessary requirements for Transportation of Dangerous Goods Answer: C 3.Solvents are added to coating formulations to A. dissolve binders and form liquid coatings. B. provide color. C. decrease film permeability. D. increase film permeability. Answer: A 4.Common errors that can produce inaccurate readings when using Wet Film Thickness (WFT) gauges include: Select All That Apply A. Using a damaged gauge B. Dragging a gauge through wet coating C. Placing the gauge along the longitudinal axis Answer: AB

  3. 5.ISO ST 3 is described as: A. Thorough hand tool cleaning B. Very Thorough power tool cleaning C. Very Thorough hand or power tool cleaning D. Thorough blast cleaning Answer: C 6.Prior to the pre-job conference you notice that the Inspection and Test Plan does not require a hold point after surface preparation and coating application. In speaking with the owners' representative in advance of the meeting you sense he/she does not understand the importance of the hold point. As a NACE CIP Level 1 Inspector your preferred course of action is to: A. Gather data and attempt to meet with the owner's representative in advance of the pre-job conference B. Bring the matter up at the pre-job conference C. Default to the owner's Inspection and Test Plan

  4. D. Meet separately with the coating manufactures' representative and coating application company in advance of the pre-job conference Answer: B 7.You are an inspector on a project where SSPC SP 3 is specified. What sort of tools should you expect the Contractor to use to achieve the standard? A. Abrasive blast nozzles B. Power tools C. Hand tools D. Airless spray equipment Answer: B 8.The least effective method of surface cleaning is most likely A. water blasting. B. dry grit blasting. C. hand tool cleaning.

  5. D. power tool cleaning. Answer: C 9.NACE No. 4/SSPC-SP-7 is a joint standard for A. white metal blast cleaning. B. brush-off blast cleaning. C. commercial blast cleaning. D. near-white metal blast cleaning. Answer: B 10.Surface profile describes: A. The level of surface cleanliness required after abrasive blasting B. The level of surface roughness required after abrasive blasting C. The initial condition of the surface prior to abrasive blasting D. The general condition of the surface required after abrasive blasting

  6. Answer: B

More Related