1 / 24

Do This If Your BMW's Check Engine Light Comes On After Oil Change

So, your BMW's check engine light started flashing shortly after getting its oil changed... and, now you're looking for reasons why it happened. Well, go through the above presentation to find out the answeru2026

worldclassautorepairs
Download Presentation

Do This If Your BMW's Check Engine Light Comes On After Oil Change

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Do This If Your BMW's Check Engine Light Comes On After Oil Change

  2. So, your BMW's check engine light came on shortly after an oil change…

  3. Now you're wondering what went wrong :(:(:( • Before you head to a nearby car service center, go through this presentation.

  4. You will find the possible reasons as well as the solutions…

  5. Reasons Your BMW's CEL May Turn On Right After Oil Change

  6. Possibility #1- Low oil pressure

  7. Oil draining & refilling is a very lengthy procedure…

  8. It may keep the oil sensors from being aware of what is happening around them.

  9. Inaccurate reading provided by these clueless sensors may trigger the CEL.

  10. Possibility #2- Adding too much oil

  11. Your BMW CEL is on because you probably put in too much oil.

  12. Filling your engine with too much oil can hurt your engine in several ways.

  13. So, stay cautious when changing the oil in your vehicle.

  14. Possibility #3- Using wrong grade of oil

  15. Never use the wrong oil type in your BMW.

  16. Always use factory recommended oil grade (10W-60, 0W-20, 0W-30, and 5W-30).

  17. Using oil that has high viscosity can damage the engine beyond repair.

  18. Possibility #4- Loose dipstick

  19. If you leave your dipstick open, the check engine light may also come on.

  20. So keep your dipstick tight.

  21. Check the oil filler cap and dipstick. If a fault is detected, act promptly. Don’t overfill your car. In case, you put too much oil, drain it using a suction pump. Here’s What You Should Do Always use BMW-approved oil.

  22. In Short;

  23. So, these are a few reasons why your BMW’s CEL may come on after an oil change. We hope this will help.

  24. https://worldclassautorepaircenter.com/ https://www.facebook.com/worldclassautorepairs https://www.yelp.com/biz/world-class-auto-repair-boca-raton THANK YOU

More Related