1 / 46

4 Geology and Groundwater

4 Geology and Groundwater . Introduction Geology complexities are reflected in hydrogeology Geology is the basis for any groundwater investigation Topics of the chapter: Aquifers and confining beds Transmissive and storage properties of aquifers Geology and hydraulic properties

wynona
Download Presentation

4 Geology and Groundwater

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 4Geology and Groundwater • Introduction • Geology complexities are reflected in hydrogeology • Geology is the basis for any groundwater investigation • Topics of the chapter: • Aquifers and confining beds • Transmissive and storage properties of aquifers • Geology and hydraulic properties • Hydraulic properties of granular and crystalline media • Hydraulic properties of fractured media

  2. 4.1 Aquifers and Confining Beds • Aquifer: A lithologic unit or a combination of lithologic units capable of yielding water to pumped wells or springs. • Aquifer can cut across formations (independent of geologic units) • Confining Beds units of low permeability that bound an aquifer • Examples are unfractured igneous rock, metamorphic rock, and shale, or unconsolidated sediments such as clays

  3. Types of aquifers • Confined aquifer (artesian): bounded by low-permeability beds on both sides (above and below) • Unconfined (water-table): water table forms upper boundary

  4. P= atm P> atm

  5. UNCONFINED AQUIFER

  6. Confining beds

  7. ARTESIAN WELL A well whose source of water is a confined (artesian) aquifer. The water level in artesian wells stands at some height above the water table because of the pressure (artesian pressure) of the aquifer. The level at which water stands is the potentiometric (or pressure) surface of the aquifer. If the potentiometric surface is above the land surface, the well is a flowing artesian well.

  8. ARTESIAN WELL

  9. SPRING A place where ground water naturally comes to the surface at the intersection of the water table and land surface.

  10. Potentiometric surface,water table maps

  11. Perched aquifer Unconfined aquifer developed above regional water table (lens) caused by a low-permeability layer Water table Unconfined aquifer

  12. Types of confining beds Aquifuge, Aquitard, Aquiclude Not favored (used) anymore • Aquifuge: ultimate low-k unit, essentially impermeable. e.g., granite • Aquitard: low-perm unit, capable of storing water, transmitting water between adjacent aquifers • Aquiclude: confining bed

  13. 4.2 Transmissive and Storage Properties • Two most important aquifer characteristics: • Ability to store groundwater • Ability to transmit groundwater • Transmissivity: Ease with which water moves through an aquifer (rate at which water is transmitted through a unit width of aquifer under a unit hydraulic gradient

  14. Transmissivity T = Kb T: Transmissivity, units: [L2/T] e.g., m2/d K: Hydraulic conductivity b: aquifer thickness Darcy’s Law with T instead of K

  15. example • What is the transmissivity of an aquifer that has a thickness of 20 m and a hydraulic conductivity of 15 m/d? • T = Kb = 20*15 = 300 m2/d

  16. Storativity (Coefficient of Storage) and Specific Storage • If water is removed from a confined aquifer: • Hydraulic head decreases - water level in wells falls • Fluid pressure decreases in the aquifer. • Porosity decreases as the granular skeleton contracts (aquifer collapses slightly) • The volume of water increases • In unconfined aquifer, main source of water is drainage of water from pores

  17. Storativity (coefficient of storage) • Storativity (S): the volume of water that an aquifer releases from or takes into storage per unit surface area per unit change in head. • Storativity is a dimensionless property S = volume of water/(unit area) (unit head change) =L3/(L2 * L)= m3/m3

  18. Storativitycontd. In confined aq. S ranges from 10-3 to 10-5 Specific Storage is the volume of water that an aquifer releases from or takes into storage per unit surface area per unit aquifer thickness per unit change in head Ss = volume of water _______________________ (unit area)(unit thickness)(unit head change) = 1/m S = Ss b

  19. Storage in Confined Aquifers SS in a confined aquifer reflects storage coming from compression of granular matrix and expansion of water w: density of water g: gravitational constant (9.81 m/s2) n: porosity of aquifer p: vertical compressibility of rock matrix w: compressibility of water (4.8x10-10 m2/N)

  20. Example 4.2

  21. Storage in Unconfined Aquifers Pumping water from unconfined aquifer: • early stage: water comes from expansion of water and compression of matrix • Later stage: water comes from gravity drainage S = Sy + bSs

  22. Specific Yield and Specific Retention • Specific yieldof the aquifer is the amount of water per unit volume that will drain from an aquifer under the influence of gravity • Specific Retentionof the aquifer is the amount of water retained as a film on the surface of grains or held in small openings by molecular attraction Sy + Sr = n

  23. Example 4.3

  24. Geology and Hydraulic properties • Hydraulic properties of geologic material are related to rock type material types to be examined: • Unconsolidated sediments • Semi-unconsolidated sediments • Carbonate rocks • Sandstone rocks • Volcanic and other crystalline rocks

  25. Aquifers in unconsolidated sediments • Blanket sand and gravel aquifers (alluvial) • Medium to coarse sand and gravel • Basin-fill aquifers (valley-fill, wadi-fill) • Sand and gravel filling depressions formed by faulting or erosion • Aquifers in these materials are mainly unconfined

  26. Unconsolidated K depends on: • grain size, • mineral composition, • Sorting K (clay) < 3 x 10-4 m/d K (coarse gravel) = 100 m/d K (well sorted) > K (poorly sorted) Most aquifer in western Saudi Arabia are of this type

  27. Blanket sand and gravel aquifers • E.g., fluvial deposits (alluvial aquifer): long, narrow, thin aquifers • Braided rivers • Meandering rivers • Alluvial fans • Basin-Fill aquifers

  28. Aquifers in semi-consolidated Sediments • Sandstone aquifers • Carbonate-Rock aquifers • Enhancement of permeability and porosity by dissolution • Karst aquifers • Basaltic and other Volcanic-Rock aquifers

  29. 4.4 Hydraulic Properties of Granular and Crystalline Media • Do rocks keep original porosity and permeability? • What geologic processes change hydraulic properties? • Original porosity >30% in many deposits • Porosity changes with depth (compaction) • More clay, more loss of porosity • More ss, less loss of porosity (resistance of compaction) • Mineralogical alterations due to high T • Cementation

  30. 4.5 Hydraulic Properties of fractured Media • Originally impermeable rocks can be good aquifers due to fractures • Fracture: a planar discontinuity in a rock or cohesive sediment • Joints: macro-fracturess, no movement along plain

  31. 4.5 Hydraulic Properties of fractured Media

  32. 4.5 Hydraulic Properties of fractured Media • Fracture described by • Orientation • Size • Aperture (b): measure of width of fracture opening • Fracture set • Fracture density: number of fractures per volume • Fracture frequency: number of fractures intersecting a unit length of borehole • Fracture spacing: distance between two adjacent fractures

  33. 4.5 Hydraulic Properties of fractured Media Snow, 1968 Example 4.4

More Related