1 / 23

Batch Pumping – A New Method to Solve Downhole Liquid Holdup

Batch Pumping – A New Method to Solve Downhole Liquid Holdup. Bill Elmer 2005 Beam Pumping Workshop. Gas flows from casing annulus Liquid is pumped up tubing Some fluids rise with gas due to ineffective gas / liquid separation in small diameter casing. Batch Pumping for Rod Pumped Gas Wells.

wynona
Download Presentation

Batch Pumping – A New Method to Solve Downhole Liquid Holdup

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Batch Pumping – A New Method to Solve Downhole Liquid Holdup Bill Elmer 2005 Beam Pumping Workshop

  2. Gas flows from casing annulus • Liquid is pumped up tubing • Some fluids rise with gas due to ineffective gas / liquid separation in small diameter casing Batch Pumping for Rod Pumped Gas Wells

  3. Identifying and Solving Liquid Holdup • Problem: Casing and liner sizes smaller than 5-1/2” have an annular area that is too small for effective downhole separation of gas and liquids.

  4. Identifying and Solving Liquid Holdup • Problem: Casing and liner sizes smaller than 5-1/2” have an annular area that is too small for effective downhole separation of gas and liquids. • What is happening? • Fluid is prevented by turbulence around perforations from falling • Cross-Sectional area too small to effect separation • Gas velocity not high enough to lift fluids, but will drag fluid

  5. Identifying and Solving Liquid Holdup • How to Identify? • Wells pumping at 15% or less • Wells that initially responded well to rod pumping, but dropped off over a period of several days • Wells that are erratic producers • Wells producing at rates greater than 40% of Coleman

  6. Identifying and Solving Liquid Holdup • Test to see if it is a problem • Note length of normal pumping cycle • Prior to start of pumping cycle, manually shut-in casing for 10 minutes. Time length of this pumping cycle • Note if normal pumping time changes appreciably, you have holdup • Open casing valve when pumpoff completed

  7. How to Solve Liquid Holdup • Install automated valve to perform this process • Pneumatic or electric powered of sufficient diameter • Give consideration for POC makers to add this ability to product, as well as the sale of actuated ball valves and solenoid for gas operated motor valves

  8. How to Solve Liquid Holdup • Install automated valve to perform this process • Pneumatic or electric powered of sufficient diameter • Give consideration for POC makers to add this ability to product, as well as the sale of actuated ball valves and solenoid for gas operated motor valves • Field experience in East Texas suggests shut-in times of 6 to 8 minutes prior to starting pumping unit.

  9. Separator Sizing Comparison in Comparison to Coleman Modified Mist Flow • Conventional industry separator calculations used to determine capacity of annular area to provide separation • Coleman Modified Turner calculations used at same temperature and pressure using cross-sectional area of annulus • Coleman values on average 9 times higher than separation values • Conclusion: Fluid will not separate in annular area, but velocity too low to lift fluids, predicting Liquid Holdup

  10. Separator Sizing Comparison in Comparison to Coleman Modified Mist Flow • Conventional industry separator calculations used to determine capacity of annular area to provide separation • Coleman Modified Turner calculations used at same temperature and pressure using cross-sectional area of annulus • Coleman values on average 9 times higher than separation values • Conclusion: Fluid will not separate in annular area, but velocity too low to lift fluids, predicting Liquid Holdup

  11. Separator Sizing Comparison in Comparison to Coleman Modified Mist Flow • Conventional industry separator calculations used to determine capacity of annular area to provide separation • Coleman Modified Turner calculations used at same temperature and pressure using cross-sectional area of annulus • Coleman values on average 9 times higher than separation values • Conclusion: Fluid will not separate in annular area, but velocity too low to lift fluids, predicting Liquid Holdup

  12. Separator Sizing Comparison in Comparison to Coleman Modified Mist Flow • Conventional industry separator calculations used to determine capacity of annular area to provide separation • Coleman Modified Turner calculations used at same temperature and pressure using cross-sectional area of annulus • Coleman values on average 9 times higher than separation values • Conclusion: Separation capacity between 90 and 140 MCFPD, and may be adequate.

  13. Pirkle C-2

  14. Daniels Gas Unit #3

  15. Clark C-2

  16. Sales Chart! EFM a Necessity

  17. Application for wells with 2-7/8” Casing • Previous slides were wells with liners • What about 2-7/8” Casing? • EOG has installed three pumping units • Two are very new, and are pumping well • First one installed in late 2001 on CGU 108

  18. Application for wells with 2-7/8” Casing CGU 108 comprised of multiple depleted Travis Peak sands (aka Hosston) in Panola County, TX • Multiple composite bridgeplugs drilled out • J-55 tubing run to bottom without tubing anchor • 1.06” pump run on 5/8” Grade D rods with slimhole boxes to 7000’ • Conventional 160 pumping unit installed with Pumpoff controller

  19. CGU 108 2-7/8” Casing

  20. Application for wells with 2-7/8” Casing • CGU 108 Application was abandoned in 2003 • J-55 tubing parted below boxes when backing off stuck rods • N-80 tubing was really required at this depth • Paraffin was a problem, and we did not have guides • New gas lift lines were installed nearby, with plans to install gas lift valves in future

  21. Opportunities to Improve Batch Pumping Concept • Increase flow period by opening casing valve before pumpoff occurs • Like plunger lift, a goal is to maximize flow time • If adequate rathole exits below perforations, valve can be opened whenever majority of fluid has fallen past perforations

  22. Opportunities to Improve Batch Pumping Concept • Increase flow period by opening casing valve before pumpoff occurs • Like plunger lift, a goal is to maximize flow time • If adequate rathole exits below perforations, valve can be opened whenever majority of fluid has fallen past perforations • How long does it take for the fluid to fall past the perforations? • A good topic for another meeting

More Related