1 / 49

LAB TOOLS

LAB TOOLS. Identification and Function. POUNDING TOOLS. HAMMERS - TO USE TO STRIKE AN OBJECT AND WILL LEAVE SURFACE MARRING AND DENTS ON THE OBJECT MALLETS -TO STRIKE AN OBJECT WHERE THE OBJECT SURFACE IN HARDER THAN THE MALLET’S FACES AND WILL LEAVE LITTLE MARRING AND DENTS.

xantha-contreras
Download Presentation

LAB TOOLS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LAB TOOLS Identification and Function

  2. POUNDING TOOLS • HAMMERS- TO USE TO STRIKE AN OBJECT AND WILL LEAVE SURFACE MARRING AND DENTS ON THE OBJECT • MALLETS-TO STRIKE AN OBJECT WHERE THE OBJECT SURFACE IN HARDER THAN THE MALLET’S FACES AND WILL LEAVE LITTLE MARRING AND DENTS

  3. BALL- PEEN HAMMER HAMMERS

  4. MALLETS: Soft Tip

  5. Rubber Mallet

  6. PUNCHES AND CHISELS • PUNCHES- USED WITH THE BALL-PEEN HAMMER TO MOVE OR DEFORM AN OBJECT • CHISELS- USED WITH THE BALL-PEEN HAMMER TO MAINLY CUT OBJECTS AND REMOVE MATERIAL

  7. Punches: Center Punch

  8. Pin Punch

  9. Chisels: Cold Chisel

  10. PLIERS • WHAT IS A GOOD DEFINITION OF THE TOOL “PLIERS”? • ANSWER: A TOOL TO INCREASE THE TORQUE OF THE HAND.

  11. Universal Pliers

  12. Slip-Joint Pliers

  13. NEEDLE NOSE PLIERS CUTTERS

  14. Dykes

  15. VISE-GRIPS CLAMP ADJUSTMENT RELEASE

  16. Snap-ring Pliers

  17. Side Cutters (Tin-Snips)

  18. Test Your Knowledge

  19. WRENCHES AND SOCKETS • WRENCHES- COME IN SAE(US FRACRIONAL) AND METRIC SIZES, MOST ARE USED MANUALLY BY HAND • SOCKETS- COME IN SAE(US FRACTIONAL) SIZES AND ISO METRIC SIZES AND ARE GENERALLY USED WITH SOME SORT OF HANDLE OR AIR DRIVE

  20. Combination Wrench

  21. Open End Wrench

  22. Wrenches: Box-End Wrench

  23. Allen Wrench (Hex Key)

  24. SOCKET SETS • Common Socket Set Square Dive Sizes: • 1” • ¾” • ½” • 3/8” • ¼”

  25. SHALLOW AND DEEP SOCKETS DEEP SHALLOW

  26. STANDARD 6 AND 12 POINT SOCKETS

  27. IMPACT SOCKET (Black Oxide)

  28. Standard Ratchet Handle and Socket QUICKRELEASE • Use a Breaker Bar for highly-torqued fasteners • Deep and Shallow sockets • Chrome/Silver not for impact

  29. Extensions

  30. Beam Torque Wrench

  31. Click Torque Wrench

  32. SCREWDIVERS • FLAT-TIPPED • PHILLIPS • TORK (STAR) • INTERNAL HEX (ALLEN)

  33. Flat –Tip Screwdriver

  34. Screwdrivers: Phillips (Cross-tip)

  35. TORX, TORQ or Star

  36. Offset

  37. THREAD CUTTING TOOLS • TAPS FOR INTERNAL THREADS • DIES FOR EXTERNAL THREADS

  38. Thread Tap (Internal Threads)

  39. Threading Die (Outside threads)

  40. CUTTING AND SMOOTHING • SAWS • BLADES • FILES • FILE CARDS

  41. Hacksaw

  42. Double-cut File

  43. Pry Bar

  44. A FEW MEASURING TOOLS • SCALES (RULES) • FEELER GAGES • MICROMETERS • DIAL CALIPERS

  45. Measuring Tools

  46. Feeler Gauge (Thickness Gauge)

  47. Micrometer • Inch or Metric to .0001 of an inch • 0” to 1”, 1” to 2” and so on • Outside mike pictured, outside mikes also

  48. Dial Caliper • Inch or Metric to .001 of an inch • Measures inside and outside and depth

  49. MORE TOOLS IN “TOOLS PART 2” Super Ending!

More Related