1 / 10

THE POWER OF RANDOMIZATION TESTS FOR SINGLE-CASE PHASE DESIGNS

THE POWER OF RANDOMIZATION TESTS FOR SINGLE-CASE PHASE DESIGNS. 指導教授: 童超塵 作者: Ferron, John, Onghena, Patrick 主講人:吳志權. 1. ABSTRACT 2. random assignment of treatments to measurement times 3. random assignment of interventions

xerxes
Download Presentation

THE POWER OF RANDOMIZATION TESTS FOR SINGLE-CASE PHASE DESIGNS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. THE POWER OF RANDOMIZATION TESTS FOR SINGLE-CASE PHASE DESIGNS 指導教授: 童超塵 作者:Ferron, John, Onghena, Patrick 主講人:吳志權

  2. 1. ABSTRACT • 2. random assignment of treatments to measurement times • 3. random assignment of interventions • 4. random assignment of treatments to phases • 5. Results and Discussion

  3. 1. ABSTRACT • 先簡略介紹一下random assignment of treatments to measurement times 、interventions within a measurement sequence 、treatments to phases 三種隨機性檢定的方法 • 用蒙地卡羅方法去估計power使用random assignment of treatments to phases 這種設計的隨機性檢定 • 這個設計是包含2 treatments and 6 phases • power參數為6 standardized effect sizes , 4 levels of autocorrelation and 5 different phase lengths

  4. 2. treatments to measurement times • 這種方法是相似於group design • 如果有30個觀察值,分AB treatments ,則總共有30!/(15! 15!)的排列組合 • 如果no autocorrelation ,每個處理的個數超過5, 這設計的power會相似 the power of the independent samples t test • 當30 observations、standardized effect size of 1.4時, power可以高達0.98,但是因為這個設計沒有考慮到階層的關析,所以也只限於某些研究

  5. 3. random assignment of interventions • 這種隨機性檢定方法應用在連續的觀察值 • 如果有30個觀察值,AB design,AB最少5個觀察值,在6th 和 25th觀察值之間則有20個插入排列數 • AB design with 30 observations、no autocorrelation and an effect size of 1.4, the powers were found to 0.4 • ABAB design had over 6 times as many possible assignments (125) and 2 more observations (32). The power =0.56

  6. 4. random assignment of treatments to phases • 分六階層,每階層5個觀察值,則Treatment A 和Treatment B 隨機選擇三階層,所以有20種排列數 • 這個排列數會和30觀察值的AB設計在random assignment of interventions的設計一樣,但是計算出來的power不一定一樣 • MODEL:Yt = phiyt-1 + et • yt is the deviation of the observation from the mean at time t • yt-1 is the deviation of the previous observation from its mean • et is independent error

  7. 當phi=0,則Yt =et ,所計算出來的值,是在沒有自相關的時候的AB兩階段的平均差 • H0:XB-XA=0 • 在2 treatments and 6 phases 的假設下, 使用6 standardized effect sizes (0, .2, .5, .8, 1.1, and 1.4), 4 levels of autocorrelation coefficients of -.3, 0, .3, and .6), and 5 different phase lengths (4,5,6,7,and 8 observations),模擬10000次實驗所得到的power值如下

  8. 5. Results and Discussion • 這估計是好的比AB design (0.4)和ABAB design (0.56)在random assignment of interventions ,在Effect size=1.4 • Effect size 越大,power也越大 • 負自相關會使power變小,正相關於power成正比 • 當Effect size =0,power大概等於0.5 • 未來可研究在treatments to phases 再加上interventions的方法去計算隨機性檢定的power

  9. Tukey‘s Control Chart 的power檢定

More Related