1 / 1

Mounting Instructions IC 117 Rail Kit for 9 oz. ECOLAB Aerosol Dispenser

Mounting Instructions IC 117 Rail Kit for 9 oz. ECOLAB Aerosol Dispenser . Step 1:

yael
Download Presentation

Mounting Instructions IC 117 Rail Kit for 9 oz. ECOLAB Aerosol Dispenser

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Mounting Instructions IC 117 Rail Kit for 9 oz. ECOLAB Aerosol Dispenser Step 1: Gather needed material: 1 x Ecolab 9 oz. Aerosol dispenser unit, 1 x Rail Mount Kit tagged IC 117 , 2 x M4x6mm Button Head Screws, 2 x Flat Washers. Pinch holes through double sided sticking tape and place screws and washers Step 2: Place the Ecolab unit on to of the Rail mount kit and tighten screws carefully . Do not remove sticking tape cover sheet. Do not over-thighten screws which will result in damaged thread. Step 4: Place Ecolab 9 oz. Aerosol dispenser unit on Rail. Step 3: Find the Drip Pan and remove the sticking tape cover . Set the Drip Pan in a right angle flush with the lower end of the rail mount kit plate.

More Related