Walls, Ceilings and Floors

1. Walls, Ceilings and Floors

2. Types of Walls • Load Bearing walls support floors above and the roof. • Partition or curtain walls are non-load bearing and do not support anything. They act as space dividers • Moveable walls: accordion walls and modular panels. If space needs change often, you should consider using moveable walls. Conference centers, office spaces, etc. • Partial Walls: walls that are less than ceiling height, offer visual privacy but not acoustical privacy. Provide ventilation. • Spur/freestanding: walls that do not join adjacent wall at both ends. IE: fireplaces in the center of rooms, walls behind reception desks.

3. Types of Walls Moveable Walls Spur or Freestanding wall

4. Factors to consider when planning walls: • Aesthetics: formal walls have smooth surfaces and are symmetrical in the window and door placements. They are also more closed with more of a vertical emphasis. Informal walls are rough, asymmetrical, and are more open with a horizontal feel • Function and Flexibility: why use moveable walls? They offer flexibility for tenants that experience change. Moveable walls provide electrical and data lines (some even offer plumbing) built into the wall system. The flooring is installed continuous so that the walls can be moved and not require the flooring to be changed.

5. Factors to consider when planning walls: • Degree of enclosure and privacy: opaque walls mean that you can’t see thru them. Translucent means that you can see thru the windows. • Light qualities: Psychology of light. White reflects up to 89% of light and black reflect about 2%. Texture also plays a role. Smooth surfaces reflect more light that rough textures. • Durability: the amount of time and money needed to maintain the walls must be considered. This is your responsibility when specifying a wall treatment to understand your clients needs. • Acoustics: smooth, hard surfaces reflect sound while soft, porous surfaces absorb sound. Insulate wall cavities when sound transmission is an issue. • Thermal qualities: comfort and energy efficiency.

6. Types of wall materials

7. Plaster: An old technique in which plaster is applied over the wallboard or concrete block using a lath. Textures range from smooth to stucco. This technique is almost a lost trade and is not used in new homes. It often chips and cracks as a house settles over the years.

8. Gypsum Wallboard - Drywall Gypsum wallboard is the most commonly used material to cover walls in interior projects. It has evolved into a versatile, dependable material that is quick to install and easy to repair. Made from a natural crystallized mineral, wallboard is naturally fire resistant and can also act as a sound barrier. Gypsum board of 4’ wide sheets x 8’, 9’, or 10’ high is attached directly to the stud walls. The joints are taped, spackled and sanded so the seams do not show. Texture may be applied or various other finish techniques. Note: Sheetrock is brand name but used as a generic term.

9. Wood Wood comes in the form of paneling, plank (such as flooring), and veneer, etc. It provides warmth and is a good insulator but it tends to fade and is flammable. As a designer, you must verify code compliance before installing it in commercial applications.

10. Concrete Block Also known as Concrete Masonry Unit (CMU), concrete block is a very common building material for the load-bearing walls of buildings, in what is termed "concrete block structure" (CBS) This type of construction is very affordable and often found in commercial and institutional applications or as part of a residential foundation.

11. Tile Can be installed one tile at a time or in sheets held together with a mesh like backing. Tile provides easy maintenance, they are water impervious (required in public restrooms), but can create noisy interiors. They also can crack and chip.

12. Other wall finishes: Stone, Brick, glass, and resin

13. Other wall finishes: Paint, Wallpaper, Vinyl Wallcoverings

14. What is the difference? • Wallpaper: Has been used since the Colonial days in the US and for about 5 centuries in Europe. Known as the “poor mans tapestry” because only the wealthy could afford the real thing. Paper is not easily cleaned, cannot be scrubbed unless vinyl coated. It is priced by the single roll, although it is sold in a double roll. It is typically 27” wide. • Vinyl Wallcovering: More durable, usually fabric backed, does not stretch and tear during installation and is 54” wide. It can be purchased by the yard on a bolt. Typically used in commercial use and is more expensive than paper. It is categorized into two types: Type 1 and Type 11. (there is even a type III) Type one is lighter in weight (12 -15 ozs per yard) and Type II is heavier, usually 20 - 24 ozper yard and up. Type II is used in clinical areas of hospitals.

15. Three Classifications of Ceilings • Suspended from the structure • Acoustical tiles • tin • Attached directly to the structure • Gypsum board • Plaster • Tongue and groove wood • Structure and ceiling finish are the same thing. • Concrete sub floor • Exposed ducts • Exposed wood beams, joists

16. Types of Ceilings • Coffered • Barrel Vault • Coved • Tray • Exposed • Suspended

17. Coffered Ceiling • Roman Coffered ceiling at the Pantheon (118-125 A.D.) were originally covered with blue stucco and glided rosettes.

18. Barrel Vault • Changing room in the women's section of the Forum Baths. Space is covered by a stucco barrel vault, marked by groves. Floor is black and white mosaic.

19. Coved Ceiling

20. Exposed Ceilings Haddon Hall, 14th Century Middle Ages (500-1300 A.D.) featured structural details of open beams supporting a pitched roof. Some ceilings were flat with exposed beams. Upper class homes featured paintings, checkerboard designs and heraldic motifs.

21. Tray Ceilings

22. Suspended ceilings – Advantages • Low cost • Fast installation • Sound control • Flexible • Adaptability of lighting and mechanical • Easy accessibility to plenum space

23. Specialty Tiles

24. Flooring

25. Factors to Consider • Durability and wear factors • Cleaning and maintenance • Acoustics • Static electricity • Moisture in slab • Price • Appearance • Safety

26. Categories of Flooring • Soft Flooring – (warm, quite, difficult to maintain, allergens) • Rugs and Carpets • Resilient Flooring (durable, good acoustics, easy to maintain) • Sheet Vinyl • VCT (vinyl composition tile)- requires waxing which is not easy to maintain • Cork • Rubber • Linoleum • Hard Flooring (durable, noisy, more expensive) • Stone (Slate, marble, flagstone, terazzo, granite) • Brick • Ceramic Tile • Wood and Bamboo (strips, planks, parquet) • Concrete • Laminate

27. Plush Carpets Smooth (known as a Saxony) - This style of cut pile carpet is achieved when the tufts of yarn are sheared to a low, smooth pile height for uniform color and a formal look.Texture - This popular style offers a smooth, level finish, but the yarns have more twist, which creates a less formal look.Twist (known as a Frieze) - The yarns in this style are even longer, creating a soft, comfortable, casual appearance.Shag - The yarns in this style are even longer, creating a soft, comfortable, casual appearance.

28. Loop Carpets Level Loop (often called a Berber) - In this style, all the loops are the same height. The dense, firm surface of a loop pile carpet makes it ideal for high-traffic areas.Patterned Loop - The yarns in this style are also looped, but they are at two or three varying heights. The various heights can be arranged to create a wide range of patterns and textures.

29. Patterns - Pattern carpets beautifully blend loops and cuts in varying heights for dramatic, unique patterns, ranging from floral designs to geometric to pin-dot.