1 / 14

Development of Polyolefin Elastic Fibers

Development of Polyolefin Elastic Fibers.

yamka
Download Presentation

Development of Polyolefin Elastic Fibers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Development of Polyolefin Elastic Fibers In early 1990, J. Stevens and coworkers (US patent 5278272) from Dow Chemical discovered metallocne catalyst for ethylene polymerization that can incorporate high amount of alpha olefin such as octene to make copolymer that has elastic properties of an elastomer. This discovery has revolutionized the polyolefin industries. The copolymer was commercialized under the commercial name of AFFINITY*TM. The elastomer has elastic properties for stretch apparel applications. However, its upper service temperature (about 60oC) is not high enough for the applications. In 2000, T. Ho and coworkers (US patent 6803014) from Dow Chemical developed the process for crosslinking fibers from AFFINITY*TM to improve its upper service temperature. The crosslinked fiber has upper service temperature greater than 220 0C which is much better than the upper service temperature of Spandex (175oC). The commercial name of the crosslinked elastic fiber is XLA*TM.

  2. Chemical Structure and Morphology of XLA*TM XLATM is a crosslinked ethylene-octene copolymer. Ethylene-octene copolymer is an elastomer that consists of a rigid segment of crystalline ethylene polymer and a soft segment of ethylene-octene copolymer that provides the elasticity. The crosslinking provides the high service temperature (greater than 220oC). Crosslinking Crosslinking

  3. Fabrication Process of Stretch Fabrics Crosslinking XLA Fiber TM Co-knit with hard fiber Melt Spinning Wrapped with natural fiber Fabric

  4. Properties of XLA*TM Fibers and Fabrics • Soft stretch feature • Thermal resistance • Chlorine resistance • UV stability

  5. 50 DOW XLATM Spandex 40 30 Load, g 20 10 40 denier 0 0 100 200 300 400 500 600 Elongation, % Soft Stretch Feature of XLA Fiber For an equivalent of elongation, the load for spandex is greater than the load for the DOW XLA fiber. Therefore, it requires lower retract force for the DOW XLA containing stretch fabrics to relax. This translates to a softer and more comfortable stretch in garments containing DOW XLA.

  6. Thermal Resistance Dynamic Mechanical Thermal Analysis Fibers at 230oC The left figure shows that spandex melts at about 175oC while DOW XLA has thermal resistance to greater than 220oC. The right picture shows that at 230oC spandex fiber melts and breaks while the XLA fiber is intact. The thermal resistance of DOW XLA translates into a fiber which can be processed, by fabric producers or consumers, at higher temperatures than typically recommended for spandex. Fabric mills can incorporate stretch into fabrics that are dyed using the thermosol process at 210°C, and consumers now have an elastic fiber that can be ironed on a high setting (above 200°C or “3 dots”) without concern of degrading its stretch properties.

  7. Chlorine Resistance of Fibers Good chlorine resistance is required for applications such as stone washed jeans and swimwear. Fibers were exposed to a solution of 100 ppm of chlorine at 50oC. DOW XLA elastic fiber has much better chlorine resistance than spandex. This is another improvement in properties that allows design freedom for fabric and garment producers

  8. The UV stability of DOW XLA is much better than spandex fibers. The resistance to UV degradation is critical to applications such as swimwear, outdoor wear, and other sports apparel.

  9. XLA*TM fiber with improved service temperature, combined with good chlorine resistance and UV stability enables new concepts in stretch garment care and offers textile mills broader processing windows. Examples of applications of XLA*TM are shown below. Swimwear Denim Intimates Tailored Clothing Ready-to-wear (no need to iron) Active Wear

  10. Conclusions • New polyolefin elastic fibers for stretch apparel were developed. • The new fibers have the following advantage • Soft stretch • Fabrics are softer and have more comfortable stretch • Superior thermal resistance • High temperature dye process • High temperature heat set process • Can be ironed at high setting temperature • Superior chlorine resistance • Stone washed jeans • Swimwear • Superior UV stability • Outdoor wear • XLA fibers enable new concepts in stretch garment and offer textile mills broader processing windows • XLA has been awarded the new generic classification of lastol by the Federal Trade Commission

  11. Biography of the Speaker Dr. Thoi Ho is a technical consultant in the area of polymer additives for plastics. He obtained a BS in Chemistry from Saigon University, a PhD in Polymer Chemistry from Tohoku University, Sendai, Japan, and completed post doctoral work at Columbia University, New York. He served as a technical leader in Polycarbonate and Polyolefin R&D departments for Dow Chemical Co. Dr. Ho has over 26 years of experience in process chemistry, new product development, and polymer additives (antioxidants, light stabilizers, flame retardants, processing aids, and slip agents) for polycarbonates and polyolefins with Dow Chemical. He is an inventor and a co-inventor of 90 U.S. and world patents. He is currently chairman elect of the Polymer Modifier and Additive Division (PMAD) of the Society of Plastics Engineers.

  12. Acknowledgment • The author would like to thank his former colleagues Drs. Selim Bensason and Rajen Patel for their expertise in material science and fiber spinning, and Dr. Rona Reid for her expertise in textile technology.

  13. Key References • W. Hoenig, T. Ho, R. Reid, and P. Yap, Development of a New Polyolefin Elastic Fiber- Enhancing Service Temperature and Chemical Resistance to Enable New Concepts Stretch Apparel Application, International Polyolefin Conference , 2004. • T. Ho. S, Bensason, R. Patel, K. Houchens, R. Reid, S. Chum, L. Walsh, “Method of making elastic articles having improved heat resistance”, US patent 6,803,014 B2, 2004 • T. Ho and J. Martin, “Structure, Properties and Applications of Polyolefin Elastomers Produced by Constrained Geometry Catalysts, Metallocene-based Polyolefins Edited by J. Scheirs and Kaminsky , 2000 John Wiley & Sons Ltd, vol.2, page 175 • S.Y. Lai, J.R. Wilson, G.W. Knight. And J.C. Stevens, “Elastic Substantially Linear Olefin Polymers”, US patent 5,278,272 • S. Chum, C. Kao, and G. Knight, “Structure, Properties and Preparation of Polyolefins Produced by Single-site Catalyst Technology, Metallocene-based Polyolefins Edited by J. Scheirs and Kaminsky , 2000 John Wiley & Sons Ltd, vol.1, page 261 • Spandex-Wikipedia

More Related