Smooth Aluminum Finish
Aluminum is a relatively soft metal that is easily nicked, scratched and damaged by handling u2013 both during the part manufacturing process and after. Restoring aluminum to a uniform and smooth surface finish can be accomplished with mass finishingThe aluminum part on the left clearly shows the scratches and damage due to heavy handling. The part on the right is the result of a simple mass finishing process to create a uniform, matte surface finish. The part (aluminum cylinders) were vibratory tumbled in a wet process with a general purpose (KM) Ceramic Media and cleaning/lubricating compound for 2 hours. Ceramic Media is typically used with harder metals such as steel; however, in this case, there was no need to further polish the part. If a higher polish is required, a lighter cutting Plastic or Synthetic Media can be used in a (potentially) longer cycle time. This step would be followed with a polishing step.
44 views • 3 slides