1 / 45

Global Climate Change Alliance: Intra-ACP Programme Training Module Climate Change Finance

Global Climate Change Alliance: Intra-ACP Programme Training Module Climate Change Finance Module 4 – Introduction to the Clean Development Mechanism (CDM) Ms Isabelle Mamaty Senior Expert Climate Support Facility. Module Structure. CDM background and concept

yosef
Download Presentation

Global Climate Change Alliance: Intra-ACP Programme Training Module Climate Change Finance

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Global Climate Change Alliance: Intra-ACP Programme Training ModuleClimate Change Finance Module 4 – Introduction to the Clean Development Mechanism (CDM) Ms Isabelle MamatySenior ExpertClimate Support Facility

  2. Module Structure • CDM background and concept • Additionality and baseline scenario • CDM project design document (PDD) • CDM challenges in developing countries

  3. What is the Clean Development Mechanism (CDM)? Kyoto Protocol (1997): • “The Common but Differentiated Responsibilities principle” • Entered into force February 2005. • Binding GHG emission reduction targets for Annex I countries (developed countries and economies in transition): • 5% below 1990 levels by 2008-2012 (First compliance period). • Reductions in emissions of 6 Greenhouse Gases, measured in CO2 equivalence. • Compliance by Annex I countries: • Domestic emission reduction through policies and measures. • Flexibility mechanisms

  4. Kyoto Protocol (1) • Annex I (Developed Countries) agreed to reduce their GHGs by 5.2 % below 1990 levels in 1st commitment period 2008 – 2012 • Kyoto Protocol is a legally binding agreement for emissions reductions by industrialised countries through three market-based mechanisms: • Emissions trading “carbon market” • Clean development mechanism (CDM) • Joint implementation (JI) • 184 Parties of the Convention have ratified its Protocol to date.

  5. KYOTO Protocol CDM mechanism • Annex 1 countries invest in GHG reduction projects in non-Annex 1 countries and receive Certified Emission Reductions (CERs) to fulfil their binding commitments.

  6. CDM objectives Article 12 of the Kyoto Protocol has two main objectives: 1. Assist host countries (non-Annex 1) achieve sustainable development. 2. Provide flexibility to Annex-1 investors in reducing their emissions.

  7. CDM Principles • Developed countries (Annex 1) with binding emission caps assist developing countries with no emission limits in developing activities/projects for GHG reduction. • The project/activity must contribute to sustainable development in the host country • GHG reductions must • create real, measurable and long- term benefits to climate change mitigation. • be additional to any reductions that would occur in the absence of the proposed project/activity. • A scenario that represents what would have happened in the absence of the proposed project /activity should be developed (Baseline scenario) • The baseline is derived using a methodology approved by the CDM Executive Board • Funding of CDM projects should be distinct from ODA

  8. CDM rationale • Provides market-oriented means to promote sustainable development (SD) while reducing GHG emissions below what they would have otherwise been. • Promotes private sector investment in SD (distinct from ODA). • Provides a ”bottom–up’ approach regarding project development. • Involves public scrutiny.

  9. CDM Participation Requirements • Voluntary participation from host countries • Participating non-Annex I (developing) countries must • Ratify the Kyoto Protocol • Designate a National Authority (DNA) responsible for approving CDM projects • Participating Annex I (developed) countries must • ratify the Kyoto Protocol • Designate a National Authority (DNA) • Establish national inventory & registry • Demonstrate a strong reporting capacity

  10. DNA Functions • To issue Letter of Approval for a CDM project activity stating that the participation is voluntary • To confirm that the project activity contributes to the sustainable development objectives of the host country • To provide a point of contact concerning national CDM policies & procedures • To facilitate the development of a portfolio of CDM projects and promoting investment • To act as a “one stop shop” for CDM in the Host Country

  11. Institutional Framework of a CDM process • Project participant 1: Developing Country, Project developer • Project participant 2: Annex 1 Country: Investor, Buyer • National Approval: Designated National Authority (DNA) • Designated Operational Entity (DOE I): verifies that project meet all CDM requirements • Designated Operational Entity (DOE II): certifies emission reductions once the project is operational • CDM Executive Board (EB): issues CERs

  12. DOE Functions • A designated operational entity (DOE) is an entity designated by the COP/MOP, based on the recommendation by the Executive Board, as qualified to validate proposed CDM project activities as well as verify and certify reductions in anthropogenic emissions by sources of greenhouse gases (GHG). • A designated operational entity shall perform validation or verification and certification on the same CDM project activity. Upon request, the Executive Board may however allow a single DOE to perform all these functions within a single CDM project activity.

  13. How does CDM work ? Host Party (non-Annex I) with no an emission cap A total emission cap of an Annex I Party Annex I Party Specific project in host country Specific project in a host country Acquired CERs are added to emission cap CERs CERs CERs Non- Annex I Parties with benefit from projects activities resulting in CERs Baseline scenario Project scenario

  14. CDM projects by scope • Domination of energy projects: Energy industries (renewable/ non renewable sources): 66% Followed by: • Waste handling and disposal: 14,70 • Manufacturing industries: 4,75% • Fugitive emissions from fuels (solid, oil and gas): 4,4%% • Agriculture: 3,7% ….. • Afforestation and reforestation: less than 1%

  15. CDM concept: Additionality (1) As per CDM: • A [small-scale] CDM project activity is additional if anthropogenic emissions of greenhouse gases by sources are reduced below those that would have occurred in the absence of the registered [small-scale] CDM project activity • Additionality is the requirement that the greenhouse gas emissions after implementation of a CDM project activity are lower than those that would have occurred in the most plausible alternative scenario to the implementation of the CDM project activity.

  16. CDM project: Additionality (2) • This alternative scenario may be the business-as- usual case (that is, the continuation of current emission levels in the absence of the project activity), or it may be some other scenario which involves a gradual lowering of emissions intensity. • Additionality is a principle condition for the eligibility of any project under the CDM. • Additionality is a requirement for validation, and will be confirmed by the designated operational entity (DOE) as part of the validation report.

  17. CDM Concept: Baseline (1) The baseline for a CDM project activity • is the scenario that reasonably represents the anthropogenic emissions by sources of greenhouse gases that would occur in the absence of the proposed project activity • Thus, a baseline for a CDM project activity is a hypothetical reference case, representing the volume of greenhouse gases that would have been emitted if the project were not implemented

  18. CDM Concept: Baseline (2) • The baseline can be used to determine: • whether a CDM project activity is additional; and • the volume of additional greenhouse gas emission reductions achieved by a project activity. • Baselines must cover emissions from all gases, sectors and source categories listed in Annex A to the Kyoto Protocol that occur within the project boundary. • A baseline is deemed to be accurate if it is derived using an appropriate baseline methodology

  19. CDM concept: Baseline (3) • A baseline is deemed to reasonably represent the most likely alternative scenario to project implementation if it is developed using a baseline methodology that is: • already approved by the Executive Board; or • developed in accordance with the rules for developing new methodologies and then approved by the Executive Board.

  20. CDM concept: Baseline (4) How to Establish a Baseline • Using approved methodologies (if not available, a new methodology has to be developed) • In a transparent, conservative and justifiable manner • On a project-specific basis • Using simplified procedures for small-scale projects • Taking account of national and/or sectoral policies

  21. CDM Concepts: Emission reduction principle Baseline Emissions GHG Emissions Project Emissions Emissions reduction The difference between the actual project emissions and the emission baseline constitute the volume of CERs Time

  22. CDM concept: crediting period (1) • The crediting period for a CDM project activity is the period for which reductions from the baseline are verified and certified by a designated operational entity for the purpose of issuance of certified emission reductions (CERs). • Project participants shall choose the starting date of a crediting period to be after the date the first emission reductions are generated by the CDM project activity. A crediting period shall not extend beyond the operational lifetime of the project activity.

  23. CDM concept: crediting period (2) • There are two options for the length of a crediting period: fixed crediting period or renewable crediting period • Fixed crediting period: • the length and starting date of the period is determined once for a project activity with no possibility of renewal or extension once the project activity has been registered. • The length of the period can be a maximum of ten years for a proposed CDM project activity • Renewable crediting period: • A single crediting period may be of a maximum of seven years. • The crediting period may be renewed at most two times (maximum 21 years), through validation and endorsement process by respectively a designated operational entity and the Executive Board • The starting date and length of the first crediting period has to be determined before registration.

  24. Estimated Timeline of a CDM project Step 1- Project feasibility assessment /PIN Step 2-CDM project development /PDD Step 6-Implementation and Monitoring /monitoring report Project developer Step 3-Host approval /letter of approval DNA Step 7-Project verification/certification/ report DOE Step 4- Project validation CDM Executive Board Step 8-CER issuance Step 5- Project registration

  25. CDM PDD preparation • Key document involved in the validation and registration of a CDM project activity: information on the essential technical and organisational aspects of the project activity • One of the three documents required for a CDM project to be registered, along with the validation report and the letter of approval • Specific PDDs exist for different project types: • Large-scale project activities (CDM-PDD) • Small-scale project activities (CDM-SSC-PDD) • Afforestation and reforestation project activities (CDM- AR-PDD) • Small-scale afforestation and reforestation project activities (CDM-SSC-AR-PDD) • Programmes of Activities (CDM-POA-DD) and CDM Programme Activities (CDM-CPA-DD)

  26. CDM PDD preparation: Programmes of Activities (PoA) • A voluntary coordinated action by a private or public entity which coordinates and implements any policy/measure or stated goal (i.e. incentive schemes and voluntary programmes), which leads to anthropogenic GHG emission reductions or net anthropogenic greenhouse gas removals by sinks that are additional to any that would occur in the absence of the PoA, via an unlimited number of CDM programme activities (CPAs). • CDM Project Activity (CPA) is defined as Project Activity that actually generates CER Individually unique and identifiable with a clear, defined boundary

  27. CDM PDD preparation: Programmes of Activities (PoA) • Programme Level Programmatic CDM (PoA) • One Coordinating/managing Entity (CME) - who coordinates/manages the PoA • PoA provides a Framework to implement CPAs • Activity Level (PoA) Individual CDM Programme Activity (CPA) • Implementing Partners carry on individual CPAs • Achieves GHG reductions or removals by sinks using methodologies CPA CPA CPA CPA POA

  28. CDM PDD preparation: Bundling of small projects • Bundling of small projects is “bringing together of several small-scale CDM project activities, to form a single CDM project activity or portfolio without the loss of distinctive characteristics of each project activity »(Executive Board Report Annex 21, Annex 21, paragraph 3) • Bundled projects can obtain a single validation report and a single certification report for the entire bundle, which streamlines these processes for project participants • A form with information related to the bundle (F-CDM-BUNDLE) should be completed in addition to the PDD document(s)

  29. CDM PDD preparation: types of CDM projects

  30. CDM PDD preparation: PDD sample • The CDM PDD is divided into 5 sections: • Section A - General description of the project activity; • Section B - Application of a baseline and monitoring methodology • Section C - Duration of the project / crediting period • Section D - Environmental impacts • Section E - Stakeholder comments • Attachments to the CDM PDD: • Annex I - Contact information on participants in the project activity • Annex 2 - Information on public funding • Annex 3 - Baseline information • Annex 4 - Monitoring information

  31. CDM-PDD preparation: Baseline Approved methodology • Definition: Methodologies are standardised procedures how to measure and calculate emission reductions in a CDM project. Each CDM methodology consists of two parts: • A baseline methodology, which is the emissions that would have been created in the most plausible alternative scenario to the implementation of the project activity (called the baseline scenario) • A monitoring methodology, which refers to the method used by project participants for the collection and archiving of all relevant data necessary for the implementation of the monitoring plan

  32. CDM PDD preparation: What is a baseline approved methodology? • Extensive elaborations on: • Formulas • Definition of project boundaries • Monitoring requirements • Leakage • Compulsory to use • Project type specific • Approval by the Executive Board needed • Different sets for large scale and small scale projects

  33. PDD preparation: CDM project types • Micro Scale Projects defined as the project activity is an off grid activity supplying energy to households/communities (less than 12 hrs grid availability per 24 hrs day is also considered as off grid for this assessment); and is located in a SIDS or an LDC and is either of the following types: • Type 1:Renewable Energy Project with 5 Megawatts electricity (or 15 MW thermal). • Type 2: Energy efficiency projects with 20 GWh savings per year. • Type 3: Any other project with 20 Kilo tonnes of CO2 reduction per year • A Small-Scale CDM project is defined as: • Type 1: Renewable energy systems with15MW (electrical) capacity • Type 2: Energy Efficiency projects with a saving of 60 GWh per year • Type 3 : Any other project reducing 60 Kilo tonnes CO2 per year • Any CDM project activity not possessing the abovementioned characteristics is considered a large-scale CDM project activity.

  34. Where does a baseline approved methodology comes from ? • There are more than 100 methodologies • Large scale CDM methodologies are proposed by a CDM project developer using an approved new methodology template and approved by the CDM EB • Small scale methodologies are mainly directly drafted by the small‐scale working group and approved by the CDM EB

  35. Availability of baseline approved Methodology • Ideally there would be an existing methodology approved by Executive Board (EB) applicable directly to the proposed project • CDM EB has provision for suggesting a new methodology or modification in an existing methodology • As far as possible, use existing methodology to avoid complexity and time overrun

  36. PDD preparation – Monitoring plan • Monitoring plan should include, the following information related to the project boundary during the crediting period • collection and archiving of all relevant data necessary for estimating or measuring anthropogenic emissions by sources of GES • The collection and archiving of all relevant data necessary for determining the baseline of anthropogenic emissions by sources of GES; • The identification of all potential sources of, and the collection and archiving of data on, increased anthropogenic emissions by sources of GES outside the project boundary that are significant and reasonably attributable to the project activity; • Quality assurance and control procedures for the monitoring process; • Procedures for the periodic calculation of the reductions of anthropogenic emissions by sources by the proposed CDM project activity, and for leakage effects; • Documentation of all steps involved in the calculations

  37. CDM Project Cycle – Indicative Timelines and Costs Preparation and review of the Project: carbon risk assessment and documentation: $40 K Project completion 3 months Up to 21 years Baseline: $20K Monitoring Plan: $20K Periodic verification & certification Verification: 15$-30K 2 months CDM Processes 1-3 years Validation process Contract, processing and documentation: $30K 2 months 3 months Project Appraisal and Negotiation Construction and start Initial verification at start-up : $25K Source: World Bank Full transaction cost for 1 time 10 years CER period: 165,000 USD 3 times 7 years CER period: 195,000 USD

  38. CDM project vs. Conventional project

  39. CDM: Challenges in developing countries • Lack of CDM projects in developing countries. • Dispersed nature of population: Small projects. • Low potential for GHG reduction hence low CER generation. • Investors not keen. • High transaction costs. • Lack of awareness, capacity (institutional, technical, regulatory). • DNAs not set-up in most developing countries.

  40. CDM: Sources of funding to support CDM process

  41. Turning words into action

  42. Discussion Have you ever developed a CDM project in your sector or at your level ? what are the institutional and capacity needs in your organisation to do so? • Questions and answers • Discussion and sharing of experiences concerning the development of CDM project

  43. Where to get the information? • Getting information : visit of the CDM website: http://cdm.unfccc.int/about/index.html

  44. Case studies • Presentation of different steps of a CDM PDD document preparation based on a concrete case study of project with emphasis on : Additionality – baseline concept

  45. Thank you Contact: Dr. Pendo MARO, ACP Secretariat pendomaro@acp.int or +32 495 281 494www.gcca.eu/intra-acp

More Related