1 / 1

+10V

Ultrasound Tx Evaluation Board TX_SDK_V1 Power Supply Setup for LM96551, LM96530, LM96570. +5V. +3.3V. +10V. +50V. -10V. -50V. -5V. +1.8V. Low Voltage Power Supply for LM9650 input stages and LM96530. In operation it consumes less then 100mA.

Download Presentation

+10V

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Ultrasound Tx Evaluation BoardTX_SDK_V1 Power Supply Setup for LM96551, LM96530, LM96570 +5V +3.3V +10V +50V -10V -50V -5V +1.8V Low Voltage Power Supply for LM9650 input stages and LM96530. In operation it consumes less then 100mA Low Voltage Power Supply for LM96570. In operation it consumes less then 100mA 3 3 4 2 +5V +3.3V +1.8V -5V High Voltage Power Supply for intermediate stages of LM96550 and LM96530. In operation it should consume less then 250mA current. 2 4 +10V -10V Substrate bias for LM96550 and LM96530. In operation it consumes less then 100mA. Make sure the current limit is turned all the way to Max limit -50V High Voltage Power Supply with at lease 250mA capabilities. Make sure the current limit is turned all the way to Max limit GND 5 1 1 5 +50V -50V -50V Power supply “ON” sequence Power supply “OFF” sequence

More Related