1 / 3

1 channel 12v 30a relay control board module with optocoupler

Buy Online 1 channel 12v 30a relay control board module with optocoupler from Robomart<br>https://robomart.com/1-channel-12v-30a-relay-control-board-module-with-optocoupler

yuvaana
Download Presentation

1 channel 12v 30a relay control board module with optocoupler

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 1 channel 12v 30a relay control board module with optocoupler Price:- ₹ 232.46 Product Highlights 1. Channel: 1 channel 2. Relay Voltage: 12V 3. High impedance controller pin 4. Pull-down circuit for the avoidance of malfunction 5. One normally closed contact and one normally open contact 6. Triode drive, increasing relay coil

  2. DESCRIPTION This 1 channel 12V 30A relay control board module with optocoupler modules is compliant with international safety standards, control and load areas isolation trenches it has a single relay a genuine. The inputs of 1 Channel 12V 30A Relay Module are isolated to protect any delicate control circuitry. The power supply and relay instructions, lit, a disconnect are off. The input signal, signal, common Terminal and start conducting. It can be used as a single chip module for appliance control and work with both DC or AC signals where you can control the 220V AC load. High-level trigger refers to the signal voltage between input and trigger, can be understood as a signal input with VCC cathode short-circuit triggered a way; Low-level trigger refers to the signal voltage between the input terminal and Earth OV trigger, can be understood as a signal input terminal and the GND negative electrode short circuit triggered is a way 1-channel relay module connection. ● ● Features : 1. High impedance controller pin 2. Pull-down circuit for the avoidance of malfunction 3. One normally closed contact and one normally open contact 4. Triode drive, increasing relay coil 5. Power supply indicator lamp 6. Control indicator lamp 7. With 4 fixed screw holes, hole diameter 3.1mm, convenient installation, and fixation Store Address RoboMart.com (A Unit of APS Innovations Pvt Ltd.) C-27, First Floor, Sector 12, Noida-201301 (UP) India Timing: 9:00 AM to 6:00 PM (Monday to Saturday) Email: admin@robomart.com Mobile: +91-8744000555

More Related