1 / 25

Equipment Safety

Equipment Safety. For Laboratory and Facility Employees Tulane University June 2012. Objectives. To become aware of the need to inspect equipment To identify provisions of proper machine safeguarding & hazards involving loose-fitting clothes, long hair, & jewelry

yvonne-buckner
Download Presentation

Equipment Safety

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Equipment Safety For Laboratory and Facility Employees Tulane University June 2012 Tulane University - Office of Environmental Health & Safety (OEHS)

  2. Objectives • To become aware of the need to inspect equipment • To identify provisions of proper machine safeguarding & hazards involving loose-fitting clothes, long hair, & jewelry • To identify procedures for addressing potentially contaminated equipment • To review basic Lockout/Tagout procedures Tulane University - Office of Environmental Health & Safety (OEHS)

  3. Safe Use of Equipment • Regularly inspect equipment, including office machines such as copiers & printers. • Use equipment according to the manufacturer’s recommendations. Tulane University - Office of Environmental Health & Safety (OEHS)

  4. Safe Use of Equipment • The easiest way to avoid injury is to use properly guarded equipment and appropriate safety equipment. • Avoid loose-fitting clothes and long hair that might become entangled in a power tool and remove rings, watches, neck chains and other jewelry. • Avoid contact with moving parts of the machinery. Tulane University - Office of Environmental Health & Safety (OEHS)

  5. Machine Guarding • Guards are normally installed by manufacturer as standard equipment, but not all commercial equipment meets OSHA requirements. • If guards are not provided, they must be installed locally before placing machine in operation. Tulane University - Office of Environmental Health & Safety (OEHS)

  6. Machine Guarding • Ensure guard is in place to prevent contact with moving parts and hazardous motions. • Areas needing guarding include belts, rollers, gears, saw blades, etc. (The belt and pulley are not guarded in the photo.) Tulane University - Office of Environmental Health & Safety (OEHS)

  7. Machine Guarding • Guards should: • Prevent contact with body parts, hair, clothing • Be securely in place • Create no new hazard or interference • Allow for safe lubrication and maintenance. Tulane University - Office of Environmental Health & Safety (OEHS)

  8. Machine Guarding • Guards must be firmly secured to the machine. • They should not be easily removed or subject to tampering • Guards must be made of a durable material that can withstand conditions of normal use. Tulane University - Office of Environmental Health & Safety (OEHS)

  9. Machine Guarding • Guards must create no new hazards, such as a jagged edge or unfinished surface that could cause injury. • Guard edges should be rolled or bolted to eliminate sharp edges. • Guards should not interfere with work. • A guard that hampers work or makes work uncomfortable may be overridden or disregarded. Tulane University - Office of Environmental Health & Safety (OEHS)

  10. Machine Guarding • Where possible, lubricate equipment without removing safeguards. • For example: a lubricating reservoir outside the guard with a line to the lubrication point reduces the need for the worker to remove the guard or work in the hazardous area. Tulane University - Office of Environmental Health & Safety (OEHS)

  11. Potentially Contaminated Equipment • Contaminants can be due to both usage or materials used in manufacturing equipment: • Biological agents, radioactive materials, toxic chemicals • Mercury switches, PCBs in transformers, Halon/Freon). • Examples: • Refrigerators or microwave ovens used with hazardous materials • Fixed building equipment (plenums, ductwork & vacuum systems associated with lab hoods) Tulane University - Office of Environmental Health & Safety (OEHS)

  12. Potentially Contaminated Equipment • Prior to repair, transport or disposal, such equipment must be certified as safe with a written, attached tag. • Certification is the responsibility of OEHS staff. • The Departmental Safety Representative (DSR) or supervisor must contact OEHS for certification as per policy. Tulane University - Office of Environmental Health & Safety (OEHS)

  13. Potentially Contaminated Equipment • Facilities Services will not move or dispose of any equipment that may contain or be contaminated with hazardous materials unless it has been tagged by OEHS. • This applies primarily to lab equipment such as refrigerators, freezers, centrifuges, ovens, incubators, lasers, biological safety cabinets, laminar flow workstations , chemical and radiological fume hoods, etc.  Tulane University - Office of Environmental Health & Safety (OEHS)

  14. Potentially Contaminated Equipment • Supervisors/Principal Investigators (PIs) are responsible for preparing potentially contaminated equipment so that it is in a safe condition prior to equipment transfer (moved, serviced, shipped, or disposed). • This includes decontaminating equipment and surfaces and removing hazardous materials (chemicals, radioactive materials, biological materials, blood, sharps, etc.).    Tulane University - Office of Environmental Health & Safety (OEHS)

  15. Potentially Contaminated Equipment • Once the equipment is decontaminated, the responsible Supervisor/PI must complete an Equipment Transfer Certification form. • OEHS personnel will inspect the equipment and if all contaminants have been adequately removed, a green sticker will be placed on it. • The sticker will indicate that the piece of equipment has been inspected by OEHS and is approved for transfer. Tulane University - Office of Environmental Health & Safety (OEHS)

  16. Potentially Contaminated Equipment • For more information on Tulane’s Equipment Transfer Policy, see http://tulane.edu/oehs/safety/equiomenttransferinfo.cfm Tulane University - Office of Environmental Health & Safety (OEHS)

  17. Lockout/Tagout • Lockout/Tagout is used to prevent the release of hazardous energy, or unexpected equipment startup/energization, which can cause injury. • The goal of Lockout/Tagout is the neutralization of all energy sources (mechanical, hydraulic, pneumatic, chemical, thermal) to obtain zero mechanical state. Tulane University - Office of Environmental Health & Safety (OEHS)

  18. Lockout/Tagout • Always lock and/or use cautionary signage (tag) on equipment during maintenance or repair work. • Example: Lockout & tag out electrical switches when working on electrical distribution panels, sub-panels, motor controls, fixed equipment, etc. Tulane University - Office of Environmental Health & Safety (OEHS)

  19. Lockout/Tagout • Ensure power sources are disconnected & tagged out of service, then test to ensure power is off before beginning work. • Wear proper Personal Protective Equipment (PPE) and use proper safety equipment. • Upon completion of repair work, test the system before putting in service, restore controls to normal operations, remove tags, and replace panel covers. Tulane University - Office of Environmental Health & Safety (OEHS)

  20. Lockout/Tagout • For additional information see: • OEHS Policies & Procedures Manual, Section 24, “Facilities Services” (The Manual is available at http://tulane.edu/oehs/upload/PPMFullWebA.pdf .) • OSHA Standard for Control of Hazardous Energy (Lockout/Tagout) 29 CFR 1910.147 Tulane University - Office of Environmental Health & Safety (OEHS)

  21. Review • Inspect equipment to ensure it is safe and proper safeguarding is in place. • Safeguards prevent contact with moving parts and must not be removed when the equipment is in use. • If not installed by the manufacturer, safeguards must be installed locally before placing equipment in operation. Tulane University - Office of Environmental Health & Safety (OEHS)

  22. Review • Avoid loose-fitting clothes and long hair that might become entangled in a power tool and remove rings, watches, neck chains and other jewelry. Tulane University - Office of Environmental Health & Safety (OEHS)

  23. Review • Potentially contaminated equipment must be certified as safe with a written tag prior to repair, cleaning, transporting or disposal. • Lockout/Tagout is used to prevent equipment energization or unexpected movement. Tulane University - Office of Environmental Health & Safety (OEHS)

  24. Review • Lockout is neutralization of all energy sources to obtain zero mechanical state. • Tagout is tagging of machinery receiving maintenance or repair work. Tulane University - Office of Environmental Health & Safety (OEHS)

  25. Tulane UniversityOffice of Environmental Health & Safety (OEHS)http://tulane.edu/oehs Karen Douglas (Uptown), Environmental Health & Safety Specialist(504) 865-5307 /kdougla1@tulane.eduSusan Welch (Downtown), Assistant Director(504) 988-3996 /swelch@tulane.eduIf unable to proceed to quiz, type the link below into your browserhttps://pandora.tcs.tulane.edu/ehs/enterssn.cfm?testnum=87 Proceed to Quiz

More Related