1 / 21

Lecture 13

Lecture 13. Extended LANs and ATM Homework 3.1, 3.3-3.7, 3.9-20. Switches and Hubs. Switches Only forward traffic to a network containing the addressee Hubs Forward traffic to everyone Switched networks scale much better. Broadcast and Multi-cast on Switched Networks.

zahi
Download Presentation

Lecture 13

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lecture 13 Extended LANs and ATM Homework 3.1, 3.3-3.7, 3.9-20

  2. Switches and Hubs • Switches • Only forward traffic to a network containing the addressee • Hubs • Forward traffic to everyone • Switched networks scale much better

  3. Broadcast and Multi-cast on Switched Networks • Broadcast address-how’s it different from ethernet? • Multi-cast address-

  4. LAN Switches and Bridges (Datagram)

  5. Bridges Learn the Port of Each Host! • Hosts must sign in with the bridges to build the routing table—but this is transparent to the users • Routing table starts empty • Addresses not in the table are handled as broadcasts • The first message you send sets up your entry (address and port) in the routing table

  6. Multicast • Bridges have a jointly-held multi-cast address • Members of a multi-cast address send a message using their multicast address to the bridges’ multicast address

  7. An Extended LAN with loops • Broadcast packets loop endlessly

  8. Spanning Tree-Dealing with loops • Idea is to temporarily deselect redundant ports to eliminate loops • Bridges are labeled: B1, B2, B3 etc • Bridge with smallest label becomes the root bridge • Each bridge computes distance to the root for each port—number of hops • Bridge on each LAN with smallest distance to the root becomes a designated bridge-using the port closest to the root

  9. How spanning tree eliminates loops in an extended LAN

  10. Running Spanning Tree • Bridge maintains dynamic values of : • the root id • the minimum distance to the root (in hops) • These numbers are determined by exchanging configuration messages (X,d,Y) • Y=myid • d=minimum distance to root • X=rootid

  11. Initially each bridge thinks itself to be the root and sends----(myid, 0, myid) • Update and resend (incrementing d) if • Receive a message with a smaller rootid • Receive a message with a smaller distance to root • Receive a message with same rootid and distance but smaller sender id

  12. Do not forward traffic from Port A to Port B if a message arrives on Port A with a smaller distance to the root than Port B. (remember ties are broken using smallest ID)

  13. Spanning signaling-an example

  14. Limits of Extended LANs • Spanning tree becomes inoperable for more than 10’s of LANs • Broadcast traffic becomes a burden • VLANs can be used to break up an extended LAN into logical domains • Security

  15. Cell Switching (ATM) • Fixed Size Cells-53 bytes • 48 bytes of data • 5 bytes of header • Address formats-Network Service Access Point (SAP) or E.164 formats

  16. Fixed Cells- Facilitate hardware switches Facilitate parallel switching-scalable Small Cells Reduced delay for unloaded switches Finer queue control-QOS Variable Cells Minimize overhead Large Cells Minimize overhead ATM Design Considerations

  17. ATM and Telephone Traffic • 8 bit sampling at 8KHz • 125msec/ 1 Byte sample • Time to accumulate a N byte cell is N*125 msec • 48 byte cell takes 6 msec

  18. ATM Header • Generic Flow Control • Virtual Circuit Identifier • VPI –Virtual Path Identifier • VCI-Virtual Channel Identifier • Type • 1 yy network signaling • 0 xz • x=EFCI-congestion • z=user signaling • Cell Loss Priority • Header Error Correction

  19. Segmentation and Reassembly (SAR)—Application Adaptation Layer (AAL)

  20. Segmentation and Encapsulation for AAL 3/4

  21. ATM Adaptation Layer 3/4 Packet Format • Convergence Sublayer Protocol Data Unit (CS-PDU) • ATM Cells

More Related