1 / 3

Pick and Load

Pick and Load. 1). 2). 3). 1) Scan the 1 st Pick Slip from the Pick List. 2) Scan the 2 nd Pick Slip from the Pick List. The User can scan up to 12 different Pick Slips. Function Keys F6= Finish Scanning Pick Slips. 3) Scan the Load number from the Load Sheet or the Load Label.

zeal
Download Presentation

Pick and Load

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Pick and Load 1) 2) 3) 1) Scan the 1st Pick Slip from the Pick List. 2) Scan the 2nd Pick Slip from the Pick List. The User can scan up to 12 different Pick Slips. Function Keys F6=Finish Scanning Pick Slips 3) Scan the Load number from the Load Sheet or the Load Label. ¹ See the Rules for Entering/Scanning Unit Id’s.

  2. Pick and Load (Continued) 4) 5) 6) 4) Scan the From Unit Id. This can be any type of Containment. Function Keys F2=Display Open Quantities on all Lines. F3=Skip to the Next Item to Pick F4=Set to an Item on the Pick F5=Part Inquiry F7=Display Comments F10=Back Order Line 5) Enter the Quantity to Pick. The Quantity is Defaulted to the lesser of the Open Quantity or Unit Quantity. If the From Unit Id was Loose or Static type or if multiple Items were on the Container then the Item and Lot would have been prompted for. 6) Scan the To Unit Id. This is normally a General Unit Id and must start off empty with no Inventory on the Container. ¹ See the Rules for Entering/Scanning Unit Id’s.

  3. Pick and Load (Continued) 7) 8) 7) Transaction Accepted is displayed and the Inventory is Transferred from the Unit Id in it’s Inventory Location to Location “OUTBOUND” for the To Unit Id. The Sales Order is also Updated with a New Status and is tagged with the To Unit Id. 8) Scan the Unit Id to where the remaining Quantity will be placed upon. Since a Partial Unit Id was Picked for “313” then it wants to know what you are going to do with the remaining Quantities. It will process another “IT” to where you place the remainder or you can leave the reminder on “313” by pressing Enter. ¹ See the Rules for Entering/Scanning Unit Id’s.

More Related