150 likes | 308 Views
2. Perspective Drawings. Step 1 Quarter the page as shown with light lines then add the two additional lines. Step 2 Measure a set distance up as shown 30mm and join to RVP as indicated.
E N D
Step 1Quarter the page as shown with light lines then add the two additional lines
Step 2Measure a set distance up as shown 30mm and join to RVP as indicated.
Step 3Where that line intersects the vertical line down from CVP construct light line from LVP as in the drawing.
Step 5Add the two extra light lines from LVP and RVP. We have now drawn four squares on the ground.
Step 6We can now add many more going backwards using the same method of construction. Continue until there are 36 squares.
Step 7Shade the alternate squares as shown. Now we have made a floor.
Step 8Next we shall draw some walls. Add the two extra light lines 40mm up from dead centre
Step 10Using only vertical lines and lines going to RVP or LVP lightly construct some windows and a door.
Step 11Firm them in and add a door knob and a little shading on the ceiling.
Step 12You can now add more shading, or try to add a picture to the wall, some curtains and a table.