1 / 6

Common Equipment 2 ： DC power Supply

Common Equipment 2 ： DC power Supply. ---MODEL LPS-305 Motech. NTHU General Physics Laboratory. Specifications. Front panel controls. +Vset +Iset. + output control key. -Vset -Iset. - output control key. toggles the tracking mode on / off. 5V or 3.3V output selecting key.

zyta
Download Presentation

Common Equipment 2 ： DC power Supply

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Common Equipment 2 ：DCpower Supply ---MODEL LPS-305 Motech NTHUGeneral PhysicsLaboratory

  2. Specifications

  3. Front panel controls +Vset +Iset + output control key. -Vset -Iset - output control key. toggles the tracking mode on / off. 5V or 3.3V output selecting key. GDN Terminal +output terminal 5V/3.3V Terminal -output terminal

  4. OPERATION---Ex:+V setting 3.Set +V; key in number 1.Power on 4.Enter 5.outputon/off Connect to load

  5. LCD display message Indicator of the independent mode or tracking mode. Flashing cursor implies the unit is working normally. Indicator of CV mode or CC mode of + output (positive). It will flash when the output is enabled. Indicator of CV mode or CC mode of - output (negative). It will flash when the output is enabled. Indicator of the selected output 5V or 3.3V. It will flash when the output is on. Note: INDEP mode:+source & -source out put is independent; Tracking Mode :+source & -source out put will follow the +source setting.

  6. Serial output If the load is connected between the positive and negative output terminals, the unit becomes a power source which can supply twice as much voltage as the rated output voltage.

More Related