How to keep your Computer Cool - GardTecOnline

1. How to keep your Computer Cool Your PC consists of many parts, almost all of them creates heat when it is on. When the temperature inside your processor is not maintained, some of the parts such as the graphics card and the CPU can overheat. In a correctly configured laptop or desktop, the majority of the heat is propelled out of the device by fans. However, if your device is not propelling the hot air quick enough, the temperature can get so warm that you can damage your computer or laptop. Thus, it is essential to keep your device at the correct temperature at all times. One of the easiest things that you can do to ensure that your computer is cool is to make sure that there is proper airflow. To do this, you need to ensure that there are no obstacles in the fan guards and that the filter fans are clean. The filter guards are situated at the side of the computer’s casing and the back. The majority of the hot air is propelled outside of the back end of the casing and it should be unobstructed and open. If your processor is stored inside a desk, ensure that the door is not closed permanently. It is worth noting that cool air enters from the sides and the front of the case. However, if the door remains closed, hot hair will get trapped inside the casing and the temperature will rise. Many individuals believe that running your device with the casing open will improve airflow. If truth to be told, there will be more airflow, but with the case left open debris and dust will accumulate much faster on the fan blades and inside the fan filter, than when the casing is closed. In the long run, this will cause more problems since the fans will slow down and crash faster than normally. A clogged up fan filter, fan guards, and fan blades can not cool your expensive computer cooling components effectively.

2. Even if your computer is running effectively in the beginning, with the case open, the exposure to debris and dust to the fan blades, fan guards, as well as fan filter will have a significant impact on keeping your desired temperature at the end of the day. Dirt in the form of pet hair, dust, grime, etc. can find entrance into your computer. Unfortunately, these things get stuck on your fan guards, fan filters, as well as fan blades. Thus, to ensure your computer runs optimal, you need to clean the inside of your processor regularly. An effective way to keep the temperature low in your PC is to clean the fans inside the processor. Just shut down your computer, open the casing and use an air can, to remove the dust and grime from each fan as well as the fan guard. If there is too much access dirt, then it is best to remove the pc outside when cleaning it, or else the dust and grime will just end back inside your processor. Apart from cleaning the fan guards, fan filters, and fan blades, it is also important to examine if your computer’s power supply is working correctly. A faulty power supply can cause your device to overheat and crash. To determine if your power supply has a faulty fan place your hand at the back of the computer to feel if hot air is propelled. If not, it might be necessary to replace your power supply. In conclusion, to keep your laptop or computer running effectively, it is necessary to regularly clean your components. If you find that some of the components are faulty or damaged, then you should visit a computer cooling specialist to give you advice on what products to buy. About Us Founded in 1987, GardTec Online is a US-based computer cooling specialist that caters to Europe, Asia, and North American markets. The company present online customers with easy to use website that carries over 4 million cooling products such as fan guards, fan filters, fan cords, complete cabinet cooling fan kits and more. With a solution-driven sales approach, superior range of products, along with a team that is dedicated to after-sales care, it is enough reasons to look past your existing supplier. For more information visit: https://gardteconline.com/