1 / 9

Elements of Structures

Elements of Structures. Entrance Assessment Prepared by Prof. Marcia C. Belcher, PE. 1500 lb. 1500 lb. 1. What load type will create the shear and bending moment diagrams shown? Concentrated load Trapezoidal load Uniformly distributed load. 1500 lb. 1500 lb.

cicely
Download Presentation

Elements of Structures

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Elements of Structures Entrance Assessment Prepared by Prof. Marcia C. Belcher, PE

  2. 1500 lb 1500 lb • 1. What load type will create the shear and bending moment diagrams shown? • Concentrated load • Trapezoidal load • Uniformly distributed load

  3. 1500 lb 1500 lb • 2. Calculate the resultant of the load that is applied to the beam.

  4. 2m 3m 2m • 3. For the beam shown, where is the location of the maximum moment? • Left support • Right support • 2m from left • 5m from left

  5. 2m 3m 2m • 4. From the FBD of the beam and shear diagram shown, what is the value of the maximum moment? • 331.6 Nm • 663.2 Nm • -192.7 Nm • None of the above

  6. 5. For the bar shown, if P is equal to 5000 lbs and the axial stress is 50 psi, what is the cross-sectional area of the bar in square inches? • 1 • 10 • 100 • 50 • Not enough information given to calculate area of the bar

  7. 6. For the bar shown, if P is equal to 100 lbs, what is the strain experienced by the bar if the cross sectional area is 25 in2 ? • .001 • .0025 • .0035 • Not enough information given to calculate strain of the bar

  8. What kind of beam is indicated by the diagram above? • Simply supported • Steel wide flange • Cantilever • None of the above

  9. 8. Which of the following free body diagrams best represents the beam shown above? • a.   • b. • c.

More Related