1 / 9

Products - Allied Flow Controls

Products supplied by Allied Flow.

cshen10
Download Presentation

Products - Allied Flow Controls

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Actuators and Accessories Limit Switch Boxes Valve Positioners AS-I Top Valve Controllers Pneumatic Actuators Solenoid Valves

  2. Pneumatic Actuators Scotch Yoke Actuators Spring Diaphragm Actuators Stainless Steel Actuators Rack & Pinion Actuators Four-Piston Actuators ●Stainless steel SS304 or SS316 construction. ●Dual piston rack & pisinion, dual mechanical travel stops at both Open & Closed positiones. ●Available both double acting and spring return operations. ●Fully conforms to ISO5211 and NAMUR standards. ●Ten sizes cover output torque from 130 to 34,000 in-lbfs. ●Double position adjustable at 0° and 90°. ●Carbon Steel coated with Epoxy/Polyster powder. ●Ouput torque from 133 in-lbf to 12,600 in-lbf. ●Can be operated by air, water or mineral-based hydrolic fluid. Supply Air pressure can be as low as 15 psig. ●Different mounting pad dimensions including ISO 5211. ●Dual piston rack and pinion,two mechanical travel stop structures. ●Extruded aluminum coated by polyester, PTFE or hard anodized ●Available both for double acting and spring return. ●SS304 fasteners as standard. ●Certified to SIL2. ●Output torques from 110 to 72,000 in-lbfs. ●Four Piston Rack and Pinion, dual mechanical stops. ●Anodized aluminum with powder polyster coated externally. ●Available for both Double Acting and Spring Return. Out put for from 151 in-lbf to 3,280 in-lbf. ●Same body and end componets for both DA and SR models. ●Conform to ISO 5211 and NAMUR. ●Double position adjustable at 0° and 90°. ●Carbon Steel coated with Epoxy/Polyster powder. ●Available both for Double Acting and Spring Return. ●Ouput torque ranges upto 170,000 Nm for Spring Return and 250,000 Nm for Double Acting. ●Working media pressure from 45 psig to 90 psig. ●Temperature: -75 to 390 °F.

  3. Limit Switch Boxes ALS500 Series ALS600 Series ALS200 Series ALS300 Series ALS400 Series ●Die-cast aluminum enclosure(O-ring sealed) ●Double cable entry two 1/2” NPT (also available with two 1/2” BSPP, M20 x 1.5) ●NAMUR shaft ISO bracket ●IP67,NEMA4,4X ●Available for mechanical switches,proximity sensor and magnet sensors ●Die-cast aluminum enclosure(O-ring sealed) ●Double cable entry two 3/4” NPT (also available with two 1/2” or 3/4” BSPP, two 1/2”NPT, M20 x 1.5) ●NAMUR shaft ISO bracket ●Exd II BT6, IP66, NEMA4,4X, eq. 7,8 ●Available for mechanical switches, proximity sensor and magnet sensors ●Stainless steel 304 or 316 enclosure(O-ring sealed) ●Double cable entry two 3/4” NPT (also available with two 1/2” or 3/4” BSPP,1/2”NPT,M20 x 1.5) ●NAMUR shaft ISO bracket ●Exd II BT6, IP66,NEMA4,4X, eq. 7,8 ●Available for mechanical switches, proximity sensor and magnet sensors ●Die-cast aluminum enclosure(O-ring sealed) ●Double cable entry two 1/2” NPT (also available with two 1/2” BSPP, M20 x 1.5) ●NAMUR shaft ISO bracket ●IP67, NEMA4,4X ●Available for mechanical switches, proximity sensor and magnet sensors ●Die-cast aluminum enclosure(O-ring sealed) ●Double cable entry two 3/4” NPT (also available with two 1/2” or 3/4” BSPP, two 1/2”NPT, M20 x 1.5) ●NAMUR shaft ISO bracket ●Exd II CT6, IP66, NEMA4,4X, eq. 7, 8 ●Available for mechanical switches, proximity sensor and magnet sensors

  4. ALV Solenoid Valves Directing Solenoid Valve NAMUR Solenoid Valve NAMUR Solenoid Valve Stainless Steel Solenoid Valve 610F1C0 210P1C0 310F1C0 510F3C0 310F2C0 510F3C1 610F1C7 210P1C4 210P1C5 310P2C1 510F3C2 710F1C0 210P1C6 310P2C2 510F3C3 710F1C7 310P2C3 510F3C4 Actuator Speed Controller 410F2C0 510F3C5 ASC-DA 410F2C0 510F3C6 ASC-SR 510F3C7

  5. Solenoid Valves Low Watt Solenoid Valve Speed Controller Flameproof Solenoid Valve Intrinsically Safe Solenoid Valve Stainless Steel Solenoid Valve General Purpose Solenoid Valve

  6. Valve Positioners ALP1000 Series ALP1200 Series ALP2000 Series ●Type:Mechnical E-P positioner in Rotary or Linear ●Input signal:4-20mA DC(5-15 mA DC) ●Supply pressure:1.4~7kgf/㎝² (20~100psi) ●Stroke:0–90° / 10-150mm ●Type:Digital E-P positioner in Rotary or Linear ●Input signal:4-20mA(2 wire), minimum 3.6mA ●Supply pressure:1.4~7kgf/㎝² (20~100psi) ●Stroke:0–90° / 10-100mm ●Type:Mechnical P-P positioner in Rotary or Linear ●Input signal:0.2~1kgf/㎝² (3~15psi) ●Supply pressure:1.4~7kgf/㎝² (20～100psi) ●Stroke:0–90° / 10-150mm ●Weather Proof:IP66 ●Weather Proof:IP66 ●Weather Proof:IP66 ●Explosion proof:Ex d ⅡB T6 or Ex ia IIC T6 ●Explosion proof:Exia II CT4-6, or Exd II CT6

  7. AS-i Top Valve Controllers ALSD400C1S1AS2 ALS300AS2 ALS400AS2 ALSD300C1S1AS2 ●Die-cast aluminum enclosure(O-ring sealed) ●AS-i I/O + Sensor Module (4 In 2 Out) ●Double cable entry two 3/4” NPT (Also available with two 1/2” or 3/4” BSPP,1/2”NPT, M20 x 1.5) ●NAMUR shaft ISO Bracket ●Exd II CT6, IP66,NEMA4,4X, eq. 7,8 ●Internal Solenoid Valve 5/2 or 3/2 ●Die-cast aluminum enclosure(O-ring sealed) ●AS-i I/O + Sensor Module(4 In 2 Out) ●Double cable entry two 1/2” NPT (Also available with two 1/2” BSPP,M20 x 1.5) ●NAMUR shaft ISO Bracket ●IP67,NEMA4,4X ●Die-cast aluminum enclosure(O-ring sealed) ●AS-i I/O + Sensor Module(4 In 2 Out) ●Double cable entry two 1/2” NPT (Also available with two- 1/2” BSPP,M20 x 1.5) ●NAMUR shaft ISO Bracket ●IP67,NEMA4,4X ●Internal Solenoid Valve 5/2 or 3/2 ●Die-cast aluminum enclosure(O-ring sealed) ●AS-i I/O + Sensor Module(4 In 2 Out) ●Double cable entry two 3/4” NPT (Also available with two- 1/2” or 3/4” BSPP,1/2”NPT,M20 x 1.5) ●NAMUR shaft ISO Bracket ●Exd II CT6, IP66,NEMA4,4X,7,8

  8. Applicable Specifications • • • • NEC-National Electrical Code CEC-Canadian Electrical Code IEC-International Electro-technical Commission ISO 5211: NAMUR VDI/VDE 3845: Actuator-Accessories Mounting User Association of Automation Technology in Process Industries-NAMUR SIL US: ANSI/ISA S84 EU: IEC EN61508/61511/62061 EU: EN 50128/50129/50402 EX Marking USA: NEC 500 (Class, Div, Gr), 505 (=EU, Class, Zone) CA: CEC SEC-18, ANNEX J EU: ATEX DIR 94/9/EC, IEC, EN 60079 Actuator-Valve Mounting

  9. Documentation and Certification Materials • • • • • • • • • • • ISO, CE-ATEX CSA, CSA-US, UL SIL Liability Insurance Ex NEPSI C of C, Inspection Reports, Production Test Reports Laboratory Test Reports CAD Drawings, 3-D Files Data Sheets, Literatures Specifications, Standards Suppliers Audit Reports, Material Certificates

More Related