1 / 15

The labjack

The labjack. WHAT IS A LABJACK?. An interface box that allows a computer to interact with the real world by collecting data and passing out instructions to allied equipment. USB, DB25 Plus 30 screw connectors to reach the real world. The external features of the LabJack U12 are:

hayden
Download Presentation

The labjack

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The labjack

  2. WHAT IS A LABJACK? • An interface box that allows a computer to interact with the real world by collecting data and passing out instructions to allied equipment.

  3. USB, DB25 Plus 30 screw connectors to reach the real world • The external features of the LabJack U12 are: • • USB connector, • • DB25 digital I/O connector, • • Status LED, • • 30 screw terminals. • The USB connection provides power and communication. No external power supply is needed. The +5 volt connections available at various locations are outputs, do not connect a power supply.

  4. Connections AI0 – AI7 • The LabJack U12 has 8 screw terminals for analogue input signals. These can be configured individually and on-the-fly as 8 single-ended channels, 4 differential, or combinations in between. Each input has a 12-bit resolution and an input bias current of ±90 μA. • Single-Ended: The input range for a single-ended measurement is ±10 volts. • Differential channels can make use of the low noise precision PGA to provide gains up to 20, giving an effective resolution greater than 16-bits. In differential mode, the voltage of each AI with respect to ground must be between ±10 volts, but the range of voltage difference between the 2 AI is a function of gain (G)

  5. Included Software •LJconfig: Lists all LabJacks connected to the USB and allows the local ID to be set on each. • LJcounter: Reads the LabJack counter and provides the current frequency or count. • LJfg (Function Generator): Outputs basic waveforms on AO0 (analogue output zero). • LJlogger: Saves data to disk, writes data to an HTML page on the Internet, and performs various actions (including email) on trigger events. • LJscope: Simulates an oscilloscope by reading data from 2 AI channels in burst mode. • LJstream: Uses stream mode to read, graph, and write to file, 4 AI channels. • LJtest: Runs a sequence of tests on the LabJack itself. • LJSHT: Retrieves and records data from 1 or 2 EI-1050 digital temperature/humidity probes. • LJSHTmulti: Displays data from up to 20 EI-1050 digital temperature/humidity probes.

  6. LJ config

  7. LJ Counter

  8. LJ Function generator

  9. LJ logger

  10. LJ scope

  11. LJ stream

  12. LJ Test

  13. More About The Labjack • Huge amounts of information about the Labjack and its external modules are available from www.labjack.com. • The examples pictures and text were taken from the manual, which should be consulted for the complete information. • Barry King G7KCO

More Related