Phillips 66 - Heavy-Duty Coolants

2. February 2022, Rocklea QLD– Pacific Petroleum released a blog on why and how to change the coolant in your car. Draining the coolant removes rust and deposits that build up over time. It is good to remove these deposits as they can cause overheating and damage your entire cooling system. Coolants additionally guard metals and non- metal elastomers withinside the engine you want to alternate them to lengthen your engine`s life. Here are the things needed before changing your coolant • New coolant • Air-powered refill tool • Air compressor • Hose removal tool • Shop manual to locate block drain plugs • Drain pan • Absorbent paper towels • Wrenches and screwdrivers Steps on how to change your coolant • Open exhaust valve Open the drain valve by opening, turning a quarter turn, or twisting and pulling. Remember that there are several different relief valves (unscrew and wrench, 1/4 screw, unscrew, 1/4 screw, and wrench). • Remove the pipe. Push the clamp spring with the slide joint pliers and slide the clamp away from the clamping neck. Remove the hose and drain the remaining coolant. If you have difficulty with hose clamps, you will save time and stamped joints. Lanyard pliers are available at auto parts stores or online. • Add coolant to the radiator. Mix 1 gallon of full capacity coolant (not premixed) and 1 gallon of distilled water in a clean bucket before adding the mixture to the radiator. • Remove the lower pipe • Drain and refill coolant in newer cars. Changing the engine coolant yourself can save you money. • Vacuum Fill the cooling system. Block the intake manifold in the cooler. Then open the valve and let the vacuum draw fresh coolant into the system. Repeat the process until enough system is available. • Replace thermostat and radiator cap when changing coolant The thermostat is an essential component in a Mobil regulates engine temperature. However, when changing their coolant. A mistake: a faulty thermostat is the second most common cause of overheating and engine damage (defective radiator fan is the number one cause). And worn radiator caps (sometimes on overflowing radiators) can also contribute to engine overheating. Both parts are inexpensive and provide cheap overheating insurance. • Buy the best coolant Most do-it-yourselfers buy coolant from an auto parts store because the label says it is regular, which means it works on all types of cars. Automakers disagree. Over released service advisories warning that ordinary coolants are generally not preferable with new metal alloys and gaskets used on your vehicle. Automakers are not saying this to boost sales of their proprietary coolants. and the cooling circuit so that cooling most owners system because not replace it it do the past few years, they

3. Pacific Petroleum has Phillips 66 Australia offering heavy duty coolants/antifreeze. The lines are marketed under the Guardol HD OAT name and are available as a concentrate or 50/50 prediluted to service all heavy-duty customer needs. Phillips Australia is one of the distributors of Phillips 66 products. Phillips 66 gives the best engine oils. Phillips lubricants are remarkable because of their top-grade quality. Two of their coolants are: • Guardol Oat HD coolant or antifreeze design to be used with and compatible with any life extension OAT coolant/antifreeze in any diesel utility vehicle engine or stationary engine aluminum and various metals. • SHIELD COOLANT / ANTIGEL provides protection that lasts up to 5 years or 150,000 miles (when drained and refilled as directed) and is compatible with any antifreeze/coolant used on any means. Contact Information: 1628 Ipswich Road, Rocklea QLD 4106, Australia 1300 366 245 or (07) 3258 9300 customerservice@pacificpetroleum.com.au https://www.pacificpetroleum.com.au/contact-us/ Source: jekrq34brmxr https://www.prfree.org/@bellamanda/phillips-66-heavy-duty-coolants-