1 / 44

Framing Assignment 4 Print Set “ Single Family Dwelling ” SFD

Framing Assignment 4 Print Set “ Single Family Dwelling ” SFD. Windows & Doors. Openings: Windows and doors Major impact on the house ’ s appearance Many Style options. Windows and Doors: Major part of …. The comfort / safety of the house Energy performance of the house

mahon
Download Presentation

Framing Assignment 4 Print Set “ Single Family Dwelling ” SFD

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Framing Assignment 4Print Set“Single Family Dwelling”SFD

  2. Windows & Doors

  3. Openings: • Windows and doors • Major impact on the house’s • appearance • Many Style options

  4. Windows and Doors: Major part of …. • The comfort / safety of the house • Energy performance of the house • Many of them (Multiples) with variables = Scheduled

  5. Windows & Doors Doors - Labeled on plans with number inside circle Windows – Labeled on plans with letter inside octagon or triangle …Labels refers back to a schedule

  6. Window Sections Typical Section details Head (top) Jamb (side) Sill (base) R.O. (ROUGH OPNG.) F.O. (FINISH OPNG.)

  7. Window Schedule • Size 6040 = 6’ W x 4’ L • (or hgt.) • Type - Operation • Glazing – glass type • Material – frame type

  8. Window Schedule

  9. WINDOWS 4 Ways to Evaluate • U-FACTOR • Solar Heat Gain Coefficient • Visible Transmittance • Air Leakage

  10. U-FACTOR U-FACTOR The rate of heat loss is indicated in terms of the U-Factor of a window assembly. The insulating value is indicated by the R-Value which is the inverse of the U-Value. The lower the U-Value the greater a windows resistance to heat flow and the better the insulating value.

  11. Solar Heat Gain COEFFICIENT The SHGC is the fraction of incident solar radiation admitted through a window. SHGC is expressed as a number between 0 and 1. The lower a windows solar heat gain coefficient, the less solar heat it transmits.

  12. VisibleTransmittance The visible transmittance is an optical property that indicates the amount of visible light transmitted. Theoretical values vary between 0 and 1, but most values are between 0.3 and 0.8

  13. Air Leakage Heat loss and gain occur by infiltration through cracks in the window assembly. Air leakage is expressed in cubic feet of air passing through a square foot of window area. .3 is recommended for Oregon

  14. Low-E Windows • Glass is coated with silver or tin oxide which allows visible light to pass through but reflects infrared heat radiation back into the room. • Reduces heat loss in cool climates • Allows visible light to pass through but reflects infrared heat radiation away from the room, admits up to 40% less radiant heat from the sun. • Reduces heat gain in warm climates

  15. High number for cold climate. Low number for warm climates The lower the number the better the insulating value Varies from 0 to 1.0 The higher the # the more light is transmitted. The best windows have air leakage rating between 0.1 and 0.6 cfm/ft.

  16. Single-Glazed with Clear Glass

  17. Single-Glazed with Bronze or Gray Tinted Glass

  18. Double-Glazed with High Solar Gain Low-E Glass, Argon/Krypton Gas

  19. Triple-Glazed** with Moderate Solar Gain Low-E Glass, Argon/Krypton Gas

  20. YOU TUBE

  21. Windows used for Egress when there is Fire Codes regulate size & location

  22. Flashing ...at window head and at sloped sill Window in section view …All efforts to direct water away from exterior bldg. wall

  23. DOORS

  24. Door Head Jamb Sill

  25. Example of Finish item found in Schedule – Trim ….Base (of wall) Trim details • Crown (at ceiling) • Base (at floor) • Casing (around openings) • Wainscot (mid wall)

More Related