Maxi Log-RH Single-Use| Electronic temperature data logge

1. MaxiLog Data Logger Install the MaxiThermal Software You need to “Run As Administrator” when you install the MaxiThermal Software. There are 2 programs on the soft- ware CD that need to be installed: MaxiThermal Software and GPSocketUSBservice Make sure that you have installed both programs before running MaxiThermal. Understanding the Menu Bar Change Color Logger Initialization Summary Information Copy to Clipboard Open Save As Vertical Grid Read Logger View Data Show Value Export Horizontal Grid Edit Comment Elapsed Time Print Preview Edit Text Celsius / Farenheit Q U I C K S T A R T G U I D E

2. Programming The Logger 1. Enter a Description 2. Select the Time Zone 3. Select the temperature Units. Centigrade or Farenheit. 4. Select the Start Delay time – IF YOU WANT A START DELAY. 5. Select or enter the Duration of Recording time – this will automatically cal- culate the Sample interval. 6. Select the Memory Configuration. 7. Select “No Alarm” or enter Maximum and Minimum temperature values for High & Low Alarms. 8. Click Program Unit to write the new configuration to the logger. 9. The MaxiLog Event Log will show all logger interactions. It will show that writing the new configuration was successful. Begin by starting the MaxiThermal soft- ware. Put the MaxiLog data logger into the cradle and connect it to the PC with the USB cable. On the menu bar select Logger Initialization in the drop-down menu. The / Logger Logger Initialization W i n d o w will open. 9 4 1 Remove the logger from the USB cradle. 5 Push and hold the START button to begin logging. Be sure to release the START button as soon as the display shows. 6 Reading The Logger 7 Begin by starting the MaxiThermal soft- ware. Put the MaxiLog data logger into the cradle and connect it to the PC with the USB cable. 2 n On the menu bar select Logger / Read Logger in the drop-down menu. 3 If the logger is currently recording you will be asked if you want to stop the logger record- ing and read it. 9 8 Selecting Yes will stop the logger, read the memory, and open a pop-up window to save the data.

3. drop-down menu to get a summary report of the data session. The Summary Information window will open and you can scroll through the log- ger information. Either accept the default file name or enter a file name for the data, and click Save. The progress bar will display saving status. Then, the tem- perature data will be plotted. GENERAL INFORMATION On the menu bar select Logger / Information in the drop- down menu to get general logger information. General The General Information win- dow will open. Click Read and the logger’s infor- mation will be read and filled in. Note that some loggers have two channels for dual sensors (i.e. temperature & humidity) so there could be information for more than one channel. ADDITIONAL OPTIONS Under the File Menu, users can perform the following functions. File/Export Data. Export a CSV format file for use in Excel. File/Print/... Print options: Summary, Graph, Graph and Summary, Data and Summary, Data and Graph. Creating Reports SUMMARY INFORMATION On the menu bar select Logger / Summary Information in the © 2016 MARATHON PRODUCTS, INC. R:08042016