INCIDENT: The crew was positioning mechanical support of rig carrier

1. HSE LEARNING • INCIDENT: • The crew was positioning mechanical support of rig carrier • ramp, the Rig Mechanic trapped his finger tip and crushed it • in between the rig carrier ramp and the mechanical support. • CAUSES: • Failure to follow instruction to stay clear and not involve in the job. • Failure to replicate use of only hands free method, best practice used on similar rigs • Supervisor failed to identify and use the available hands free method • Supervisor failed to identify / communicate the pinch point during the TBT. • Inadequate procedure • Lack in system of sharing best practices across the fleet. • LEARNINGS: • During Tool BoxTalks identify job specific Pinch Points. • Conduct hazards hunts to ensure that all Pinch Points are identified, recorded and marked. • Maximise use of hands free method to avoid manual intervention. • Share best practices across the board.  Left Hand Ring Finger placed in the Pinch Point Area  • Key Learning: • Minimize manual intervention and use mechanical options whenever available • Do not get involved in any job, if not part of the Toolbox Talk Mechanical Support being pulled by forklift (Hands Free) Finger Injury Use this Alert: Discuss in Tool Box Talks and HSE Meetings  Distribute to contractors  Post on HSE Notice Boards  Include in site HSE Induction Contact: MSE511 for further information or visit the HSE Website Alert No .84. LTI#3 - 2012 July, 2012