1 / 9

Leader North America “easy Pow’air ” Mt236

Leader North America “easy Pow’air ” Mt236. Basic in-service and set-up * Not designed to take the place of practical skills, please take a few moments and become familiar with the new fan . Specifications. Model # MT236 Airflow- 25,368cfm

natala
Download Presentation

Leader North America “easy Pow’air ” Mt236

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Leader North America “easy Pow’air”Mt236 Basic in-service and set-up * Not designed to take the place of practical skills, please take a few moments and become familiar with the new fan

  2. Specifications • Model # MT236 • Airflow- 25,368cfm • AMCA Airflow- 17,368cfm (Laboratory method of testing) • Run time- 2 hours 10 min. • Blade Size- 18” Reinforced composite Resin • Engine- Honda GX160 5.5hp gasoline engine, 10-30w crankcase oil. Re-fuel with VP racing fuel only • Weight- 92.6 lbs. • Full wrap around protective chassis • Noise- 91db at 10ft.

  3. Special features Automatic tilting to 10° with handle in the locked position. Manual adjustments from 10° to 20°.

  4. Special Features Tilt position accessory allows for adjustments to -10° Tilt accessory in the stowed position

  5. Special features Air “straighteners” designed to keep air flow in a straight path, increasing velocity and volume. VS.

  6. Set Up • Remove Fan from the Engine • Extended handle until it locks into position • Tilt and move to desired location • Once set, the wheels will be off the ground, unit is supported by rubber feet, thus reducing its ability to “walk”.

  7. Placement • Once the need for PPV has been determined • Place fan at the appropriate entry point • *optimal placement for the Leader Fan is 6-19ft. from the entry point • Turn Fan 90° from the opening and start fan at low Idle • Coordinate with Command/ Interior crew before directing ventilation into the structure • Direct fan into the structure and adjust tilt as needed • Check to insure fan will not creep/vibrate away from desired placement • Check to insure that adequate exhaust openings have been made

  8. So what’s the difference • Manual Tilt from -10° to 20° • Cone shape airflow • Seals doorway from 4 to 8ft. • Quick lock tires, “eliminates” movement • 1/3rd of the airflow strikes outside the structure • Lower airflow, 14,885 cfm • Weight: 84 lbs • Auto Tilt to 10° • As efficient at 6ft as at 20ft • Straight stream air flow • Not designed to seal the doorway • Up to 30% more pressure entering the structure • Higher airflow, 25,368 cfm • Greater set back, allowing for more room at the entry point.

  9. Questions? A more detailed description of the airflow technology and the MT236 PPV fan breakdown can be found by visiting the Leader North American web site at: http://www.leadernorthamerica.com/fire-fighting/ppv-fans/gasoline-driven-ppv-fans/mt236-ppv-gasoline-driven-fan-26-129-cfm-open-air-17-671-cfm-amca-1147-c299.html

More Related