1 / 62

Introduction to CMOS VLSI Design Lecture 4: DC & Transient Response

Introduction to CMOS VLSI Design Lecture 4: DC & Transient Response. David Harris Harvey Mudd College Spring 2004. Outline. DC Response Logic Levels and Noise Margins Transient Response Delay Estimation. Activity. 1) If the width of a transistor increases, the current will 

Download Presentation

Introduction to CMOS VLSI Design Lecture 4: DC & Transient Response

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Introduction toCMOS VLSIDesignLecture 4: DC & Transient Response David Harris Harvey Mudd College Spring 2004

  2. Outline • DC Response • Logic Levels and Noise Margins • Transient Response • Delay Estimation 4: DC and Transient Response

  3. Activity 1)If the width of a transistor increases, the current will  increase decrease not change 2)If the length of a transistor increases, the current will increase decrease not change 3)If the supply voltage of a chip increases, the maximum transistor current will increase decrease not change 4)If the width of a transistor increases, its gate capacitance will increase decrease not change 5)If the length of a transistor increases, its gate capacitance will increase decrease not change 6)If the supply voltage of a chip increases, the gate capacitance of each transistor will increase decrease not change 4: DC and Transient Response

  4. Activity 1)If the width of a transistor increases, the current will  increase decrease not change 2)If the length of a transistor increases, the current will increase decrease not change 3)If the supply voltage of a chip increases, the maximum transistor current will increase decrease not change 4)If the width of a transistor increases, its gate capacitance will increase decrease not change 5)If the length of a transistor increases, its gate capacitance will increase decrease not change 6)If the supply voltage of a chip increases, the gate capacitance of each transistor will increase decrease not change 4: DC and Transient Response

  5. DC Response • DC Response: Vout vs. Vin for a gate • Ex: Inverter • When Vin = 0 -> Vout = VDD • When Vin = VDD -> Vout = 0 • In between, Vout depends on transistor size and current • By KCL, must settle such that Idsn = |Idsp| • We could solve equations • But graphical solution gives more insight 4: DC and Transient Response

  6. Transistor Operation • Current depends on region of transistor behavior • For what Vin and Vout are nMOS and pMOS in • Cutoff? • Linear? • Saturation? 4: DC and Transient Response

  7. nMOS Operation 4: DC and Transient Response

  8. nMOS Operation 4: DC and Transient Response

  9. nMOS Operation Vgsn = Vin Vdsn = Vout 4: DC and Transient Response

  10. nMOS Operation Vgsn = Vin Vdsn = Vout 4: DC and Transient Response

  11. pMOS Operation 4: DC and Transient Response

  12. pMOS Operation 4: DC and Transient Response

  13. pMOS Operation Vgsp = Vin - VDD Vdsp = Vout - VDD Vtp < 0 4: DC and Transient Response

  14. pMOS Operation Vgsp = Vin - VDD Vdsp = Vout - VDD Vtp < 0 4: DC and Transient Response

  15. I-V Characteristics • Make pMOS is wider than nMOS such that bn = bp 4: DC and Transient Response

  16. Current vs. Vout, Vin 4: DC and Transient Response

  17. Load Line Analysis • For a given Vin: • Plot Idsn, Idsp vs. Vout • Vout must be where |currents| are equal in 4: DC and Transient Response

  18. Load Line Analysis • Vin = 0 4: DC and Transient Response

  19. Load Line Analysis • Vin = 0.2VDD 4: DC and Transient Response

  20. Load Line Analysis • Vin = 0.4VDD 4: DC and Transient Response

  21. Load Line Analysis • Vin = 0.6VDD 4: DC and Transient Response

  22. Load Line Analysis • Vin = 0.8VDD 4: DC and Transient Response

  23. Load Line Analysis • Vin = VDD 4: DC and Transient Response

  24. Load Line Summary 4: DC and Transient Response

  25. DC Transfer Curve • Transcribe points onto Vin vs. Vout plot 4: DC and Transient Response

  26. Operating Regions • Revisit transistor operating regions 4: DC and Transient Response

  27. Operating Regions • Revisit transistor operating regions 4: DC and Transient Response

  28. Beta Ratio • If bp / bn 1, switching point will move from VDD/2 • Called skewed gate • Other gates: collapse into equivalent inverter 4: DC and Transient Response

  29. Noise Margins • How much noise can a gate input see before it does not recognize the input? 4: DC and Transient Response

  30. Logic Levels • To maximize noise margins, select logic levels at 4: DC and Transient Response

  31. Logic Levels • To maximize noise margins, select logic levels at • unity gain point of DC transfer characteristic 4: DC and Transient Response

  32. Transient Response • DC analysis tells us Vout if Vin is constant • Transient analysis tells us Vout(t) if Vin(t) changes • Requires solving differential equations • Input is usually considered to be a step or ramp • From 0 to VDD or vice versa 4: DC and Transient Response

  33. Inverter Step Response • Ex: find step response of inverter driving load cap 4: DC and Transient Response

  34. Inverter Step Response • Ex: find step response of inverter driving load cap 4: DC and Transient Response

  35. Inverter Step Response • Ex: find step response of inverter driving load cap 4: DC and Transient Response

  36. Inverter Step Response • Ex: find step response of inverter driving load cap 4: DC and Transient Response

  37. Inverter Step Response • Ex: find step response of inverter driving load cap 4: DC and Transient Response

  38. Inverter Step Response • Ex: find step response of inverter driving load cap 4: DC and Transient Response

  39. Delay Definitions • tpdr: • tpdf: • tpd: • tr: • tf: fall time 4: DC and Transient Response

  40. Delay Definitions • tpdr: rising propagation delay • From input to rising output crossing VDD/2 • tpdf: falling propagation delay • From input to falling output crossing VDD/2 • tpd: average propagation delay • tpd = (tpdr + tpdf)/2 • tr: rise time • From output crossing 0.2 VDD to 0.8 VDD • tf: fall time • From output crossing 0.8 VDD to 0.2 VDD 4: DC and Transient Response

  41. Delay Definitions • tcdr: rising contamination delay • From input to rising output crossing VDD/2 • tcdf: falling contamination delay • From input to falling output crossing VDD/2 • tcd: average contamination delay • tpd = (tcdr + tcdf)/2 4: DC and Transient Response

  42. Simulated Inverter Delay • Solving differential equations by hand is too hard • SPICE simulator solves the equations numerically • Uses more accurate I-V models too! • But simulations take time to write 4: DC and Transient Response

  43. Delay Estimation • We would like to be able to easily estimate delay • Not as accurate as simulation • But easier to ask “What if?” • The step response usually looks like a 1st order RC response with a decaying exponential. • Use RC delay models to estimate delay • C = total capacitance on output node • Use effective resistance R • So that tpd = RC • Characterize transistors by finding their effective R • Depends on average current as gate switches 4: DC and Transient Response

  44. RC Delay Models • Use equivalent circuits for MOS transistors • Ideal switch + capacitance and ON resistance • Unit nMOS has resistance R, capacitance C • Unit pMOS has resistance 2R, capacitance C • Capacitance proportional to width • Resistance inversely proportional to width 4: DC and Transient Response

  45. Example: 3-input NAND • Sketch a 3-input NAND with transistor widths chosen to achieve effective rise and fall resistances equal to a unit inverter (R). 4: DC and Transient Response

  46. Example: 3-input NAND • Sketch a 3-input NAND with transistor widths chosen to achieve effective rise and fall resistances equal to a unit inverter (R). 4: DC and Transient Response

  47. Example: 3-input NAND • Sketch a 3-input NAND with transistor widths chosen to achieve effective rise and fall resistances equal to a unit inverter (R). 4: DC and Transient Response

  48. 3-input NAND Caps • Annotate the 3-input NAND gate with gate and diffusion capacitance. 4: DC and Transient Response

  49. 3-input NAND Caps • Annotate the 3-input NAND gate with gate and diffusion capacitance. 4: DC and Transient Response

  50. 3-input NAND Caps • Annotate the 3-input NAND gate with gate and diffusion capacitance. 4: DC and Transient Response

More Related