1 / 20

Uploading GIS Data with DNR Garmin

Uploading GIS Data with DNR Garmin. Review of DNR Garmin Uses. Upload. Download. Upload. Objectives. Upload Polygons / Lines as Tracks Upload Points as Waypoints Confirm data in GPS receiver. Connect Garmin to Computer. Connect GPS to PC with download cable.

roza
Download Presentation

Uploading GIS Data with DNR Garmin

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Uploading GIS Data with DNR Garmin

  2. Review of DNR Garmin Uses Upload Download Upload

  3. Objectives • Upload Polygons / Lines as Tracks • Upload Points as Waypoints • Confirm data in GPS receiver

  4. Connect Garmin to Computer Connect GPS to PC with download cable Connect cable to Serial Port No serial port? Use USB adaptor cable

  5. Set Interface to Garmin Press Menu Twice

  6. Open DNR Garmi n Make sure projection is correct!

  7. Load From File (Line Shapefile)

  8. Select File for Upload 1. Browse to folder 3. Select File 2. Select File Type: ArcView Shapefile 4. Click Open

  9. Confirm Data in DNR Garmin • Confirmation Message • Track Points in Table Line shapefile has been loaded into DNR Garmin as track points

  10. Upload Track to GPS Receiver

  11. Check GPS Receiver –Tracks Page

  12. Load From File (Point Shapefile)

  13. Identify Fields These Fields will Transfer to GPS

  14. Waypoint Upload WARNING! • If an uploading waypoint has the same ID name as a waypoint in the GPS receiver, then the waypoint in the GPS receiver will be overwritten. • Although this is not an issue today, it may happen on a fire!

  15. Confirm Data in DNR Garmin • Confirmation Message • Waypoints in Table Point shapefile has been loaded into DNR Garmin as waypoints

  16. Upload Waypoints to GPS Receiver

  17. Check GPS Receiver – User Waypoint List

  18. Check GPS Receiver - Map Page Congratulations!

  19. Review of Objectives • Upload Polygons / Lines as Tracks • Upload Points as Waypoints • Confirm data in GPS receiver

More Related