1 / 7

SOF Tactical Tourniquet Components

SOF Tactical Tourniquet Components. Windlass. Safety Screw. Windlass Strap. Buckle. Tri-Rings. Strap. Applying the SOF Tactical Tourniquet.

stephenh
Download Presentation

SOF Tactical Tourniquet Components

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SOF Tactical Tourniquet Components Windlass Safety Screw Windlass Strap Buckle Tri-Rings Strap

  2. Applying the SOF Tactical Tourniquet Slide the extremity through the tourniquet loop or pull the strap out of the buckle, slide the SOFTT around the extremity and re-route the strap through the buckle. Position the SOFTT at least two inches above the wound.

  3. Applying the SOF Tactical Tourniquet Pull the strap until the SOFTT is tight around the injured extremity.

  4. Applying the SOF Tactical Tourniquet Twist the aluminum windlass until the bleeding is controlled.

  5. Applying the SOF Tactical Tourniquet Secure the windlass in either of the two the tri-rings.

  6. Applying the SOF Tactical Tourniquet Tighten the safety screw.

  7. Applying the SOF Tactical Tourniquet It is not necessary to secure the windlass in both tri-rings. Once secured, reassess the limb for bleeding. Document the time the tourniquet was applied on the strap label and on the TCCC Card.

More Related