1 / 14

• Measured instantaneous data: V, I, T, and Ah

Battery Monitor – Charge Control. • Measured instantaneous data: V, I, T, and Ah. • Storage and analysis of history data. SMART. IC+. • Statistics analyses. • Data download onto a PC. • Display on a PC of instantaneous and history data with SmartViewII.

tymon
Download Presentation

• Measured instantaneous data: V, I, T, and Ah

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Battery Monitor – Charge Control •Measured instantaneous data: V, I, T, and Ah •Storage and analysis of history data SMART.IC+ •Statistics analyses •Data download onto a PC •Display on a PC of instantaneous and history data with SmartViewII •Graphic display of voltage and current •Programming of charging and discharge parameters • Charge control with Power Saving • Programmable forks lock because of empy battery

  2. Applications SMART.IC+ Collects and saves all operating data Can lock the FORKS because of empty battery With SmartCB controls the charging process with power saving

  3. Power Saving SMART.IC+ together with SMART.CB Charges battery during the cheapest hours Restores only the capacity used by the battery Makes battery life longer SMART.IC+ The cheapest hours to charge battery can be programmed

  4. Smart.IC+ System Infrared adapter AP160 Controlled battery SMART.IC+ Smart.IC+ SmartView II

  5. PC Software All data collected by Smart.IC+ can be displayed with a PC program called SmartView II SMART.IC+

  6. Data: Monitor It is possibile to analize instantaneous data ONLINE System status SMART.IC+ Smart.IC+ panel Battery level indicator Battery voltage Smart.ON inside temperature

  7. Data: Old General information on the stored cycle Smart.IC+ related data Battery rating SMART.IC+ Battery state at cycle start Battery state on discharge Date and time of battery discharge start Battery state while charging Date and time of battery charge start Battery state at cycle end

  8. Data: Info Old Details of the stored cycle Discharge data Charging data SMART.IC+

  9. Data: Diagram Instantaneous diagrams downloaded by the Smart.IC+ connector ONLINE Current diagram SMART.IC+ Voltage diagram

  10. Data: Averages Averages calculated from stored data Cycles selection Charging stage: Average capacity at the end of charging SMART.IC+ Discharge stage: Average capacity at the end of the discharge cycle Discharged average capacity Average capacity not available

  11. Data: Statistics Statistics collected by Smart.IC+ Statistics collected by Smart.IC+ SMART.IC+ Battery statistics: Discharge time Charging time Stop time Statistics collected and faults, if any

  12. Data: Statistics Statistics collected by Smart.IC+ Statistics collected by Smart.IC+ Battery statistics: Discharge time Charging time Stop time SMART.IC+ Statistics collected and faults, if any

  13. Data: Programming The functioning of Smart.IC+ can be customized by using some programming parameters concerning the discharge and charging stage of the traction battery where the connector is installed General parameters Rating SMART.IC+ Discharge parameters Charging parameters

  14. Operating range DIN 160A connector  Shunt type 2: Capacity 160 – 340Ah Shunt type 3: Capacity 350 – 740Ah SMART.IC+ DIN 320A connector  Shunt type 3: Capacity 350 – 740Ah Shunt type 4: Capacity 750 – 1300Ah Voltage size: L  Batteries from 24 to 48V Voltage size: H  Batteries from 50 to 96V

More Related