1 / 18

Hofmann Alignment Adjustment Features Training A-ARM Adjustment

Hofmann Alignment Adjustment Features Training A-ARM Adjustment . Why would the Technician want to make an adjustment?. Low Caster on right side and High Camber on right side resulting in a Pull condition to the Right.

varana
Download Presentation

Hofmann Alignment Adjustment Features Training A-ARM Adjustment

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Hofmann Alignment Adjustment Features Training A-ARM Adjustment

  2. Why would the Technician want to make an adjustment?

  3. Low Caster on right side and High Camber on right side resulting in a Pull condition to the Right.

  4. This Screen is indicating to move the front of the Upper A-Arm in, and the rear of the Upper A-Arm in

  5. Select the Jack icon to Toggle from Elevated or Turntable adjustment

  6. If the adjustments are on the Lower Control Arm, Click on the icon to Toggle to the Lower A Arm

  7. It would now be necessary to move the Lower A-Arm out at the front and out at the rear

  8. As you move the A-Arm, in the indicated direction, the scale will move towards the center.

  9. This screen shows the left side adjustment

  10. Because the left side is near desired, the Technician may skip past the left side adjust screen by clicking on the green icon

  11. Caster and Camber adjustments will normally change the Toe setting. It will now be necessary to adjust the Toe

  12. A-Arm adjust mode will use the preferred specification as the desired end result. If a setting other than preferred is desired, edit the specifications and make the desired setting the preferred

  13. Caster and Camber set to factory preferred Preferred Caster and Camber altered to help offset road crown pull

  14. Wwwww W W W

More Related