Lumin CPAP cleaner FAQ

1. Lumin CPAP cleaner - Frequently Asked Questions How do I use the Lumin? 3B Lumin CPAP cleaner is a single button device. It really could not be any easier. First wipe the inside of your mask and cushion with a wipe to remove any physical residue. If cleaning your humidifier water chamber, open the chamber and place it in the drawer face up. If cleaning your mask, lay your mask in the drawer face up. Close the drawer and press the button. In 5 minutes the cycle is complete and your mask and water chamber are ready for use. How often do I need to clean my CPAP accessories? You should take care to maintain a proper CPAP cleaning schedule for your machine’s accessories. 3B recommends that you clean your CPAP accessories at least twice a week. A quick 5 minute cleaning cycle will ensure that your accessories are ready to use. In addition, always follow the manufacturer’s recommendations for continued care of your equipment to maximize the life of your machine, mask and accessories. How does Lumin work? Lumin CPAP cleaner works by emitting high energy light within a narrow spectrum referred to as UV. The Lumin relies on a low-pressure, mercury-arc lamp designed to produce the highest amounts of UV energy – where 90% of energy is generated around 254nm. Which accessories does the Lumin clean? Will Lumin work for my accessories? (compatibility?) The Lumin will clean any item that can fit in the drawer. It is designed to handle most CPAP masks, hoses and water chambers* *S10 water chambers must be separated before placing in the drawer. The hinge is very flexible and will pop out allowing it to separate. Are there any supplies that need to be reordered? No. The Lumin requires no replacement supplies whatsoever. The Lumin relies on a UV bulb that is rated to easily outlast the life of the device and should not require changing. In the event the bulb is damaged or does require replacement, low cost replacement bulbs are available directly from 3B Medical. Will Lumin damage my CPAP mask or accessories? No. While long exposure times to UVC can weaken plastics and silicone, the Lumin cycle time is only 5 minutes. One year of daily use amounts to 30 hours of actual exposure time. In accelerated aging tests, 3B has validated no damage to plastics or silicone in over 150 hours of testing, roughly equivalent to 5 years of daily use. Does Lumin come with a warranty? Yes, Lumin is backed by 3B Medical’s comprehensive two year warranty.

2. Does Lumin disinfect the N95 mask and the other cloth masks? Lumin has an irradiance output of over 1,100 mJ/cm2 in a single 5 minute cycle. The literature establishes a COVID-19 reduce dose of 60-200 mJ/cm2. We have commissioned a specific study from a private lab to test Lumin on N95 respirator decontamination. We expect to have those results back in 2 weeks and will post it, along with all other test results, at https://www.3BLumin.com/research-and-testing. Lumin is lab tested to reduce both bacteria and viruses. Does Lumin cause an odor? UV light has no odor. The vast majority of Lumin customers experience no odor. If there is an odor it is likely similar to the smell of burnt hair. Household dust is 90% composed of dead skin cells. Skin, like hair, contains a sulfide molecule. UV cleans with high energy light. That process also frees the sulfide molecule in a skin or hair molecule. If your unit has an odor please wash thoroughly with a damp cloth using Dawn liquid detergent and dry with a paper towel. Run one cycle with the drawer empty and let the device sit overnight. Next day, your unit should have no odor. If you have any questions or comments, please feel free to visit our Support page on our corporate website at 3Bproducts.com or 3BLumin.com and fill out a Support Ticket or engage with one of our Technical Support techs via live chat or email during regular business hours. What do I do if my device has an odor? If your unit has an odor please wipe all 4 of the mirrored surfaces in the drawer thoroughly with a damp cloth using Dawn liquid detergent and dry with a paper towel. Run one cycle with the drawer empty and let the device sit overnight. The next day, your unit should have no odor. If you have any questions or comments, please feel free to visit our Support page on our corporate website at 3Bproducts.com or 3BLumin.com and fill out a Support Ticket or engage with one of our Technical Support techs via live chat or email during regular business hours. Is Lumin covered by Medicare or Insurance? No, at this point in time, neither Medicare nor private insurers are covering cleaning devices for CPAP equipment. Can I pay for Lumin using an HSA or FSA? Yes, Lumin is eligible for purchase under both HSA and FSA. If I have any questions or need help, how can I contact the company? Lumin and Lumin Bullet, are manufactured by 3B Medical. Our Technical Support department can be reached by email, phone, generating a support ticket, or by live chat during business hours. To contact us, visit our corporate website at www.3Bproducts.com and click on the Support tab. Read more about ​Lumin CPAP cleaner reviews​ for more information .