Brother MFC J491DW Setup | How To Scan & Airprint

1. Quick Brother Mfc J491dw Setup Brother MFC J491DW is an All-in-One printer that allows you to print and scan from anywhere. It is a smart and convenient multi-functional printer that allows you to print in duplex. This easy to connect wireless printer is perfect for home and office works. It has a 1.8" color display using which you can access the printer. Also, it has an Auto Document Feeder which allows you to scan multiple-page documents easily. Carry out the steps given below for the Brother MFC J491DW setup. Step 1: Unpacking the printer • Take out the Brother printer from the carton and remove the packing materials from the outside of the printer that includes the tapes, protective films, and plastic covers. • The printer accessories included in the printer package consist of the following: • Ink cartridges • AC Power cord • Quick Setup Guide • Product Safety Guide • Installation disc • Telephone line cord Step 2: Loading Paper • Pull out the paper tray located at the bottom of the printer. • Open the output tray cover and slide the paper guides to the ends of the tray. • Fan a stack of paper and tap them on a flat surface. Now, load the paper stack in the tray. • Make sure to load paper only below the maximum paper mark. • Adjust the paper guides to the edges of the paper but make sure they do not fold the paper. • Now, place the top cover on the tray and insert the tray back into the printer. • Extend the output tray out of the printer and raise the paper support flap Step 3: Connecting the power cord and making the initial settings • Fix the power cord to the rear side of the Brother MFC J491DW setup printer on the right port. Plug another end of the power cord into an AC outlet. • Raise the control panel until locks into an angle. • Tap the Power button on the printer to turn it on. • Go to the Settings section and select Initial Settings.

2. • Select the Initial Setup tab and select Local language. • Choose your language and set the correct time and date. Step 4: Installing the ink cartridges • Lower the ink cartridge door and take out the orange packing restraint. • Unpack the ink cartridges one by one and dispose of the packing material. • Gently shake the black ink cartridge 15 times before inserting it. • Continue with the instruction on the LCD screen to install all the ink cartridges. • Once you have installed the ink cartridges, check the print quality by printing a test page. Step 5: Setting up fax • If you want to print the fax, connect the telephone line cord to the printer and connect the other end to a wall outlet. • Complete setting up fax by following the on-screen instructions. Step 6: Installing the printer software • nce you finish setting up the hardware connections, install the printer software. • Choose a connection type when prompted. • If you want to print from your smartphone, install the Brother iPrint&Scan application from the Google Play Store or App Store. • Complete installing the software to print directly from your device. These are the simple steps for Brother MFC J491DW setup. For more queries, related to printer troubleshooting,reach us by clicking the link.