1 / 21

Hydraulic Ram for Fuel-free Water Lifting

Hydraulic Ram for Fuel-free Water Lifting. By Roberto A. Alaban, Jr. Design|Fabrication|Installation Technology transfer|Consultancy. Mobile: 0928 763 2788 E-mail: redrichfrost@yahoo.com Website: http://ra-initiatives.tripod.com. What is a Hydraulic Ram?.

Antony
Download Presentation

Hydraulic Ram for Fuel-free Water Lifting

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Hydraulic Ram for Fuel-free Water Lifting By Roberto A. Alaban, Jr. Design|Fabrication|Installation Technology transfer|Consultancy Mobile: 0928 763 2788 E-mail: redrichfrost@yahoo.com Website: http://ra-initiatives.tripod.com

  2. What is a Hydraulic Ram? The hydraulic ram pump may be defined as a self-acting device that uses the energy of a large volume of water falling from a higher location (relative to the ram) and passing through it, to lift a small volume to a location significantly higher than the ram and the source of water. It has only 2 moving parts.

  3. Characteristics of a Hydraulic Ram Water-Lifting System (1) there is no other external energy input (e.g. human, animal, fossil fuel, etc.) that makes the ram work other than the energy of water passing through the pump; (2) its operation will continue 24 hours a day, seven days a week so long as the required volume of water continues to flow through it, (3) water has to come from a location higher than the ram;

  4. Characteristics of a Hydraulic Ram Water-Lifting System (4) only a small portion of this water (around 25 % or less) is pumped up, the remainder passing out of the ram and must be drained to a lower location; (5) the vertical distance to which water can be pumped up from the ram is significantly higher than the vertical distance from its source to the ram – up to 30 meters delivery height per 1 meter of supply fall, although typically the most efficient is within a ratio of 10:1 or less, and;

  5. Characteristics of a Hydraulic Ram Water-Lifting System (6) due to the ram’s small output per minute, there is a need for a storage device at the point of delivery to accumulate this output on a 24-hour basis, e.g. an earthen pond for irrigation or ferrocement, metal, or plastic tank for drinking water.

  6. History The hydraulic ram is a very old, and well- proven, technology for lifting water. In 1772, Englishman John Whitehurst invented a manually-operated precursor of the hydraulic ram called the "pulsation engine." The first one he installed in 1775 raised water to a height of 16 ft. (4.9 m).

  7. History The first self-acting ram pump was invented by the Frenchman Joseph Michel Montgolfier in 1796 for raising water in his paper mill (Montgolfier is more popularly known for his work in hot-air balloons). The sons of Montgolfier obtained an English patent for an improved version in 1816 but this was acquired, together with Whitehurst's design, in 1820 by Josiah Easton, a Somerset-born engineer who had just moved to London.

  8. History Easton's firm, inherited by his son James grew during the nineteenth century to become one of the more important engineering manufacturers in the United Kingdom, with a large works at Erith, Kent. They specialised in water supply and sewerage systems world-wide, as well as land drainage projects. The Eastons had a good business supplying rams for water supply purposes to large country houses, and also to farms and village communities, and a number of their installations still survive up to this day.

  9. History In 1929 the company was acquired by Green & Carter, of Winchester, Hampshire, who were engaged in the manufacturing and installation of the well-known Vulcan and Vacher rams. Green & Carter now function from Ashbrittle, near Wellington, Somerset, U.K.

  10. Ram Pumps in the 21st century In recent years there has been a resurgence of interest in hydraulic rams, particularly in developing countries, due to the continuing rise in fossil-fuel prices. In India, Vietnam, and China their governments are very active in constructing hydraulic ram systems and in disseminating the technology to the countryside for irrigation and drinking water (a German group is leading the effort in Vietnam and China). In Africa (Zimbabwe), a British group has been active in this field since 1994.

  11. Ram Pumps in the 21st century Surprisingly, in the Philippines the ram pump is still a relatively unknown technology and has not been part of the government’s program for irrigation or potable water delivery. Even more surprising, many technically-trained individuals (engineers) have not heard about a ram pump and could not believe that water can be continuously pumped to a location much higher than its source by water inertia alone, by a pump that has only two moving parts!

  12. Ram Pumps in the 21st century Even in the country’s premier agricultural engineering school the hydraulic ram is taught mainly in theory and in passing, and one agricultural engineering professor has dismissed it for water-lifting work as inefficient because it can pump only a small portion of the total volume of water that passes through it (even though the fuel expense is totally zero).

  13. Parts of a Hydraulic Ram The ram pump is a very old technology, and for over two centuries many designs have been tried. Today, rams come in a variety of shapes and sizes, yet many of the incorporated modifications are mere variations of the same theme, and the basic design consist almost always of the following: ram body, impulse valve, delivery valve, air snifter, and air chamber.

  14. Parts of a Hydraulic Ram Shown is Chinook MP-2 2-inch ram designed by the author Air chamber Delivery pipe stub Impulse valve Delivery valve Air snifter Body Drive pipe stub Feet

  15. Parts of a Hydraulic Ram Shown is a large-bore Chinese-made hydraulic ram pump Air chamber Delivery pipe stub Impulse valve Delivery valve Air snifter Body Drive pipe stub Feet

  16. Parts of a Hydraulic Ram Different forms, same substance Delivery pipe stub Drive pipe stub Air chamber Delivery valve Impulse valve Air snifter Body Feet

  17. TYPICAL COMPONENTS OF A HYDRAULIC RAM WATER-LIFTING SYSTEM Service area/Storage facility (not shown) Source (river, stream, spring) Supply pipe Delivery pipe Drive tank Lift (Delivery head) Drive pipe Hydraulic Ram pump Fall (Drive head)

  18. COST OF A HYPOTHETICAL HYDRAULIC RAM SET UP with 2-INCH RAM Assuming data as shown Estimated output: = (Fall * Volume * 0.60)/Lift = (3 * 120 * 0.60)/20 = 10.8 liters/minute = 15,552 liters/day Delivery pipe60 m Supply pipe 30 m Lift, 20 m Drive pipe 12 m Hydraulic Ram pump, 2 inches Fall, 3 m Source flow rate 120 liters/minute

  19. COST OF A HYPOTHETICAL HYDRAULIC RAM SET UP with 2-INCH RAM (Direct material costs, excluding labor and optional dam) (Off-the-shelf) Supply pipe: 2-inch commercial grade HDPE pipe, 60 meters – P 1,500.00 Drive tank: 220-liter PVC drum – 900.00 Drain pipe: g.i. nipple 1” x 6” , sched. 40, 1 pc. -- 45.00 Gate valve 1” , 1 pc. – 125.00 Drive pipe: 2-inch g.i. pipe, schedule 40 , 2 lengths – 2,600.00 G.i. coupling, 2 inches, 1 pc. – 85.00 G.i. union, 2 inches, 1 pc. – 105.00 G.i. nipple, 2” x 6”, sched. 40, 2 pcs. – 140.00 PVC ball valve, 2 inches, with threaded ends – 280.00 G.i. union, 1 ¼”, 1 pc. -- 65.00 G.i. nipple, 1 ¼” x 4”, sched. 40, 1 pc. -- 55.00 Swing check valve, 1 ¼ ”, 1 pc. -- 215.00 Delivery pipe: 1 ¼” commercial grade HDPE pipe, 60 meters -- 750.00 Cement for drive tank and hydraulic ram base, 3 bags -- 600.00 Mixing sand -- 200.00 Miscellaneous -- 500.00 (Fabricated) 2-inch hydraulic ram pump – 12,000.00 Ram cradle – 800.00 ----------------------- Total P 20,965.00

  20. LIST OF CLIENTS • El Nido Foundation, Palawan – May 2006 • Nono Cabatac, El Nido, Palawan -- May 2006 • Victorias City Eco-park -- July 2006 • Felino Javier, Rosario, Batangas -- September 2006 • Dr. Nolasco, Roxas City -- October 2006 • Antonio Villanueva, South Cotabato -- October 2006 • Rod Plopiño, Occ. Mindoro -- November 2006 • Eric Payucong, La Union – November 2006 • Dan Cabitac, Batanes -- November 2006 • 10. Gil Montilla, Ubay, Bohol -- December 2006 • Christopher Agbayani, Puerto Princesa – December 2006 • Reynaldo Rosales, Lipa, Batangas -- December 2006 • Mike Yukor, Dumaguete -- January 2006 • Betty Yap, Cebu City -- January 2007 • Leyte Prov. Gov’t -- January 2007 • Vince Emnas, Baybay, Leyte -- January 2007 • Frank Colloquio, Guimaras -- February 2007 • Bernardino Verano, Brooke’s Point, Palawan – February 2007 • Jun Padilla, Manila – February 2007 • Ramon Ko, Bacolod City – March 2007 • Virgie Neo, Tanay, Rizal -- March 2007 • Manolo Chua, Zambales – March 2007 • Abelardo Dapat, Limay, Bataan -- March 2007 • Juan Ochoa, Pasuquin, Ilocos Norte – March 2007 • Roy Castañeda, Camotes Island – March 2007 • Leopoldo Avecilla, Alaminos, Laguna – March 2007 • Atty. Jose Gangan, Ilagan, Isabela – March 2007 • Ruby Ann Baetiong, Manila -- March 2007 • Dr. Aristeo Tantoco, Rio Tuba, Palawan -- March 2007 • Metro Clark Waste Management Corp. -- April 2007 • George Bautista, Bamban, Tarlac -- April 2007 • 32 . Aurelia Rarang, Baguio City -- May 2007

  21. Multiple-ram set up • Six 4-inch hydraulic rams with a combined output of more than 300,000 liters per day irrigate around 35 hectares of farmland in central Negros Occidental.

More Related