1 / 6

Water Hydraulic Valves

Introducing our range of. Water Hydraulic Valves. For control of Main Inlet Valve Servo motor, service & maintenance seals Pressures up to 120 bar Flow rates up to 600 litres/min 316L Stainless Steel Construction. Water Hydraulic Control Valves.

elijah
Download Presentation

Water Hydraulic Valves

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Introducing our range of Water Hydraulic Valves • For control of Main Inlet Valve • Servo motor, service & maintenance seals • Pressures up to 120 bar • Flow rates up to 600 litres/min • 316L Stainless Steel Construction

  2. Water Hydraulic Control Valves The 6mm Water Hydraulic Control valve is a ball seated type valve. The stainless steel / ceramic ball seat design ensures a virtual leak tight shut off. • M.T.B.F., SFF, PFD and SIL Data (Available upon request) • Easy Installation, Repair and Replacement • Stainless Steel Construction • Up to 120 bar Operating Pressure Range General Description The DN6 valve design incorporates a balanced internal piloting system and a lever mechanism to enable a wide range of operators to operate the valve. All valves have an ‘O’ Ring interface that enables them to be fitted with BSP.P ported subplates as standard, or manifold mounted to reduce pipework, fittings, weight and space. This interface also allows direct mounting of the valve to larger pilot operated valves up to the DN25, increasing the flow capacity to 200 l/min. By removing just 4 bolts the valves can be dismounted without disturbing pipework and possibly contaminating thehydraulic system. Blanking and flushing plates can also be supplied.

  3. Water Hydraulic Control Valves • Construction Materials • Valve bodies and subplates: 316L Stainless Steel • Wetted parts: Various grades of Stainless Steel/Super Duplex / Ceramic/Aluminium Bronze • Seal Nitrile / Buna N / PTFE / Polyurethane • Fasteners: A4, grade 80 stainless steel • Springs: stainless steel • Operating Temperature Range • Standard: 5 ºC to + 60 ºC • Ingress Protection (solenoids valves ) • IP54 • Operating Pressure Range • 15 to 120 bar • Operating Medium • Filtered Fresh Water • Recommended Filtration • DN6: 10 microns • DN15: 25 microns • DN25: 25 microns • DN40: 200 microns

  4. Water Hydraulic Control Valves • Solenoid Operated with Hydraulic Override Pilot • 2 port, 2 position • 3 port, 2 position • 120 bar max. pressure • Flow rates up to 20 l/min • Stainless Steel construction • 24VDC, 110VDC, 220VDC • Override signal, oil or water • Hydraulic Pilot Operated • 2 port, 2 position • 3 port, 2 position • 15 to 120 bar pressure range • Flow rates up to 20 l/min • Stainless Steel construction • Pilot media, Oil or Water • Plunger or Roller Cam Operated • 2 port, 2 position • 3 port, 2 position • 15 to 120 bar pressure range • Flow rates up to 20 l/min • Stainless Steel construction

  5. Water Hydraulic Control Valves • Solenoid Operated • 3 port, 2 position • Flow rates up to 20 l/min • 15 to 120 bar working pressure • Stainless Steel construction • DN40 - Hydraulic Pilot Operated • 3 port, 2 position • 5 port, 2 position • Pressure range 15 to 120 bar • Flow rate up to 600 l/min • Stainless Steel construction • Pilot media, Oil or Water • Remote position sensors • 1 ½ “ SAE 3000 psi Flanged connections or BSP.P threaded ports • Block before bleed function • Operating temperature range 5 ºC to + 60 ºC • DN15 & DN25 • Solenoid operated • Oil or Water pilot operated • 3 port, 2 position • 4 port, 2 position • Pressure range 15 to 120 bar • Flow rates up to 200 l/min • Stainless Steel construction • Pilot media, Oil or Water • Easily replaceable one piece cartridge valve design

  6. Water Hydraulic Control Valves Keep it simple ! Water Hydraulic Control Valves can simplify hydraulic control circuits and therefore increase reliability, while reducing maintenance and capital costs. Water Hydraulic Control Valves can replace conventional oil hydraulic power units and oil servo valves by utilizing the valuable natural renewable energy resource of water.

More Related